17 results (0,14894 seconds)

Brand

Colour

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Prochem C503 Proshine 2 x 5 Litre

One Coat Fence Life Dark Oak 5 litre RSLOCFLDO5L

Bio Productions Bio-production Insecticide Liquid 2 x 5 Litre

Ronseal One Coat Fence Life Tudor Black Oak 5 litre RSLOCFLTBO5L

Ronseal One Coat Fence Life Forest Green 5 litre RSLOCFLFG5L

Ronseal One Coat Fence Life Red Cedar 5 litre RSLOCFLCE5L

Ronseal One Coat Fence Life Medium Oak 5 litre RSLOCFLMO5L

Liberon Decking Oil Medium Oak 5 litre LIBDOMO5L

Prochem C255 Prorinse 4 x 5 Litre

Greenspeed Techno Floor Forte 5L 2 x 5 Litre

Liberon Palette Wood Dye Light Oak 5 litre LIBWDPLO5L

Bio Productions Bio-production CS77 Woodseal Wooden Floor Sealer 2 x 5 Litre

Bio Productions Bio-production CS77 Woodseal Wooden Floor Sealer 2 x 5 Litre

Bio-Production CS77 Woodseal Wooden Floor Sealer is designed for use on wooden floors in areas of heavy traffic. Providing a high gloss, tough floor finish, it is a water based emulsion that is fast drying, has low odour, is non-flammable and easy to apply. Wood Seal produces a rich colour and a superb deep gloss without the hazards of solvent based floor seals. Bio-Production CS77 Woodseal Wooden Floor Sealer Features: - Water based formula means no fumes and faster drying time - Non hazardous formulation means it is safer to use - Can be used in higher traffic areas - Polyurethane provides a very tough and hard wearing finish - Easy to apply and dries to superb deep gloss - Enhances the natural colour of the wood How to apply Bio-Production CS77 Woodseal Wooden Floor Sealer: - All floors that have been maintained with solvent/wax products or that are worn and patchy should be sanded before sealing with wood seal. On the final finishing a 120 grit should be used, after sanding the floor should be thoroughly vacuumed to remove all grit and dust, lightly damp mop to ensure all soiling and dust is removed, the must be free of all contamination before wood seal is applied. - With a lambs wool or flat mop applicator apply a generous neat even coat of seal, taking care not to overlap coats, allow at least 1 hour to dry. If required, the floor can be lightly buffed with a single disc machine fitted with a green pad, this will remove any blemishes/pimples/dust that may be embedded in the film. Vacuum floor again to remove dust and apply second coat at a right angle to the first. On certain soft wood floors, it may be necessary to apply a further coat to achieve a high gloss finish. - Touch dry: 1 hour, hard dry: 2 hours, foot traffic and normal wear: 8 hours, heavy traffic: 72 hours, full chemical hardness: 7 days - Coverage: 100-120sqm per 5L depending on floor type and condition

GBP 0.00
1

Prochem Clensan 5L 5L - BMP270-5

Prochem Clensan 5L 5L - BMP270-5

Prochem Clensan is a concentrated bactericidal detergent sanitiser and deodoriser for use on carpets, upholstery, floors and hard surfaces. Clensan's biocidal formula is approved to EN1276 and EN14476 and is effective against a wide range of harmful organisms including bacteria and viruses. Detergent sanitiser & deodoriser for carpets, upholstery, floors and hard surfaces. Features: - Effective against bacteria and viruses. - Approved to EN1276, EN13624, EN13697, EN13727, EN14476, EN14561, EN14562, EN1650. The active ingredients in Clensan have been tested to be effective against the following organisms, when diluted and applied according to the label directions. Bacteria: Enterococcus hirae, Listeria monocytogenes, Pseudomonas aeruginosa, Staphylococcus aureus, Escherichia coli, Salmonella cholerasuis. Viruses: Rota Vaccinia, Murine Norovirus, Orthomyxoviridae (Influenza H1N1 H5N1), Hepatitis B, HIV, BVDV, HBV, HCV, Filoviridae (Ebola), Paramyxoviridae (Measles). - Clear liquid with herbal lemon fragrance. Directions - For professional and industrial use only. - Dilution rate (all surfaces): Mix 50ml of Clensan per litre of water (1 part Clensan to 20 parts water). Solutions should always be freshly prepared. - Carpets & Upholstery: Always pre-test carpet or fabric with ready-to-use Clensan solution for colour fastness and texture change before proceeding. Apply Clensan solution by spray applicator to carpet or fabric surface and allow 5 to 15 minutes contact time for effective sanitising. Extraction clean carpet with S777 Crystal Green or extraction rinse carpet or fabric with B109 Fibre & Fabric Rinse. - Floors and Hard Surfaces: Always pre-test surface to be treated with ready-to-use Clensan solution before proceeding. Apply Clensan solution by spray applicator and allow 5 to 15 minutes contact time for effective sanitising. Wipe hard surfaces or rinse floors with water then mop or extract with wet pick-up vacuum. When using scrubber driers always check recovery tank for excessive foam and use defoamer if required. - Clensan solutions should always be freshly prepared. - Do not mix Clensan with other chemicals or detergents. pH Values - pH Concentrate: 7.5 - pH Diluted: 7.5

GBP 0.00
1