Hollyland HL-C1PRO-SC01 Solidcom C1 PRO 2 or 3 Head Case (SPECIAL ORDER)

The Hollyland Solidcom C1 Pro Carry Case is a practical and protective solution designed for the Solidcom C1 Pro wireless intercom system. Tailored for 2 and 3 headset configurations, this compact and durable cloth bag ensures that your equipment stays safe during transportation or storage. Whether you're on the move or simply need a secure place to store your headsets, this carry case offers both convenience and functionality.

AD300 Pro Adapter ring and Broncolor Mount Adapter Set

The AD300 Pro adapter ring (AD-AB) and Broncolor Mount adapter is designed to enable you to use Broncolor Fitting Modifiers with your AD300 Pro. The AD300 Pro Adapter simply clips around the body of your AD300 pro, then secure your Broncolor Mount adapter ring to the AD300 Pro adapter using the Allen key and screws supplied with the Mount adapter. Once attached, it will open up a whole new world of lighting possibilities with your AD300 Pro.

Replacement Li-Ion Battery Charger for AD600 PRO & AD600PROII (Godox C26)

The AD600 PRO Battery Charger is designed to charge the GODOX AD600PRO 28.8V 2600Ah Lithium Ion Battery. This is compatible with GODOX AD600 PRO and PIXAPRO CITI600 PRO.

Broncolor Mount Adapter Bracket Ring for AD400 PRO Studio Flash

The AD400 PRO Broncolor adapter ring enables you to mount Broncolor fitting modifiers directly onto your AD400 Pro Battery-Powered Portable strobe. This adapter attaches to your AD400 Pro via 4x small screws which are screwed onto your AD400 pro with a small Allen key. This adapter will make the AD400 Pro compatible with a wide range of Broncolor fitting modifiers that are currently available on the market.

Protective Silicone Bumper for AD200/PIKA200 Pro and AD200ProII (Godox AD200PRO-PC)

The Protective Silicone Bumper for PIKA200 Pro / AD200 Pro, has been designed to give PIKA200 Pro / AD200 Pro an extra layer of protection against knocks and falls. Made from durable silicone rubber, the Protective Silicone Bumper for PIKA200 Pro / AD200 Pro has been tailor-made specifically for the PIKA200 Pro / AD200 Pro series flashes. A necessity for photographers who often shoot on location and are always on the move, such as Wedding, Events, Portrait, Fashion, Wildlife and Sports/Action photographers. This Protective Silicone Bumper is perfect for owners of the PIKA200 Pro / AD200 Pro, who are often out and about in the city, or in nature with their flashes, where they are more susceptible to accidental knocks and falls. An essential accessory for Wedding, Events, Portrait, Fashion, Wildlife and Action Photographers who would like the reassurance of a little extra protection where it matters.

Large Capacity Battery Charger For Godox AD400 PRO (Godox C400P)

The AD400 PRO Battery Charger is designed to charge the Godox AD400 PRO 21.6V 2600Ah Lithium Ion Battery. The charger simple plugs into the charging port at the side of the AD400 PRO Battery pack and will charge it in under 2 hours.

Pocket Flash Battery Charger for PIKA200/AD200 & AD300 PRO (Godox C29)

Replacement Battery charger for PIKA200, PIKA200PRO and CITI300 Pro (GODOX AD200 and AD200 PRO Pocket Flash Battery (WB29).

2.4GHz PRO AC 16 Channel Wireless Radio Flash Trigger Only (XT16)

The PIXAPRO® PRO AC wireless flash trigger set is a 16-channel 2.4GHz radio flash trigger that can support flash grouping and allow you to control your flash(es) remotely. The PRO AC wireless flash trigger system is designed to work with the PIXAPRO® Lumi series studio flashes. It is also compatible with the PIXAPRO® PRO Speedlite transceivers.

Replacement/Battery for CITI100 Pro / AD100 PRO Pocket Flash and MF-R76 Ring Flash (GODOX WB100)

This 2600mAh Lithium-ion rechargeable battery is designed to be used with the PIXAPRO CITI100 Pro Pocket Flash, and the PIXAPRO Macro MF-R76 Macro Ring Flash. An essential piece of kit for owners of a PIXAPRO® CITI100 Pro Pocket Flash and the PIXAPRO Macro MF-R76 Macro Ring Flash who often shoot for extended periods of time, and require the reassurance of an extra battery.

Replacement/Spare Glass Protection Dome for AD300 PRO

This clear heat resistant glass dome is designed for use with the AD300 Pro Battery flash units. It protects the delicate flashtube from damage during set up or transportation.

PRO ST-III R 2.4GHz X-System Flash Receiver Only (X1R) - CLEARANCE Sony

The PIXAPRO PRO ST-III R equivalent to Godox's X1 TTL is a 2.4GHz Radio Wireless Flash Receiver designed for use with the Pixapro Pro ST-III TTL Flash Trigger system, The PIXAPRO PRO ST-III R also has a full GR Group style interface allowing up to 5 Groups to be individually set to either TTL, Manual, or Off. The ST-III system also has 32 separate channels, which enable you to use your ST-III trigger system in the vicinity of other photographers, without fear of accidentally triggering each other’s lights. NOTE: This item requires the Pro ST-III Trigger Set to trigger your flash. This Item is sold as an extra receiver for people with multiple TTL compatible flashes.

PRO ST-III R 2.4GHz X-System Flash Receiver Only (X1R) - CLEARANCE Canon

The PIXAPRO PRO ST-III R equivalent to Godox's X1 TTL is a 2.4GHz Radio Wireless Flash Receiver designed for use with the Pixapro Pro ST-III TTL Flash Trigger system, The PIXAPRO PRO ST-III R also has a full GR Group style interface allowing up to 5 Groups to be individually set to either TTL, Manual, or Off. The ST-III system also has 32 separate channels, which enable you to use your ST-III trigger system in the vicinity of other photographers, without fear of accidentally triggering each other’s lights. NOTE: This item requires the Pro ST-III Trigger Set to trigger your flash. This Item is sold as an extra receiver for people with multiple TTL compatible flashes.

PRO ST-III R 2.4GHz X-System Flash Receiver Only (X1R) - CLEARANCE Nikon

The PIXAPRO PRO ST-III R equivalent to Godox's X1 TTL is a 2.4GHz Radio Wireless Flash Receiver designed for use with the Pixapro Pro ST-III TTL Flash Trigger system, The PIXAPRO PRO ST-III R also has a full GR Group style interface allowing up to 5 Groups to be individually set to either TTL, Manual, or Off. The ST-III system also has 32 separate channels, which enable you to use your ST-III trigger system in the vicinity of other photographers, without fear of accidentally triggering each other’s lights. NOTE: This item requires the Pro ST-III Trigger Set to trigger your flash. This Item is sold as an extra receiver for people with multiple TTL compatible flashes.

Replacement/Spare AD1200 PRO Li-Ion Battery Charger (GODOX C1200P)

The PiXAPRO® CITI1200 Battery Charger is designed to charge the PiXAPRO® CITI1200 PRO Lithium Ion Battery. The charger simple plugs into the charging port at the side of the PiXAPRO® CITI1200 Battery pack.

PRO ST-III T 2.4GHz Radio-Controlled Flash Trigger (X1T) - CLEARANCE Sony

The PIXAPRO PRO ST-III equivalent to Godox's X1 TTL is a 2.4GHz Radio flash trigger system capable of transmitting TTL information between your camera and compatible flashes. The PIXAPRO PRO ST-III trigger has a transmission range of approximately 100m in an open area, and since the transmitter and receivers use radio waves as opposed to Infra-red, you don’t need direct line of sight, and is not affected by bright Sunlight which can sometimes cause problems with optical slave systems. The perfect solution for the busy photographer who require a reliable TTL radio trigger system.

PRO ST-III T 2.4GHz Radio-Controlled Flash Trigger (X1T) - CLEARANCE Fuji

The PIXAPRO PRO ST-III equivalent to Godox's X1 TTL is a 2.4GHz Radio flash trigger system capable of transmitting TTL information between your camera and compatible flashes. The PIXAPRO PRO ST-III trigger has a transmission range of approximately 100m in an open area, and since the transmitter and receivers use radio waves as opposed to Infra-red, you don’t need direct line of sight, and is not affected by bright Sunlight which can sometimes cause problems with optical slave systems. The perfect solution for the busy photographer who require a reliable TTL radio trigger system.

PRO ST-III T 2.4GHz Radio-Controlled Flash Trigger (X1T) - CLEARANCE Nikon

The PIXAPRO PRO ST-III equivalent to Godox's X1 TTL is a 2.4GHz Radio flash trigger system capable of transmitting TTL information between your camera and compatible flashes. The PIXAPRO PRO ST-III trigger has a transmission range of approximately 100m in an open area, and since the transmitter and receivers use radio waves as opposed to Infra-red, you don’t need direct line of sight, and is not affected by bright Sunlight which can sometimes cause problems with optical slave systems. The perfect solution for the busy photographer who require a reliable TTL radio trigger system.

PRO ST-III T 2.4GHz Radio-Controlled Flash Trigger (X1T) - CLEARANCE Olympus/Panasonic

The PIXAPRO PRO ST-III equivalent to Godox's X1 TTL is a 2.4GHz Radio flash trigger system capable of transmitting TTL information between your camera and compatible flashes. The PIXAPRO PRO ST-III trigger has a transmission range of approximately 100m in an open area, and since the transmitter and receivers use radio waves as opposed to Infra-red, you don’t need direct line of sight, and is not affected by bright Sunlight which can sometimes cause problems with optical slave systems. The perfect solution for the busy photographer who require a reliable TTL radio trigger system.

Set of 3 BD-09 Series Honeycomb Grid for the R1200 and R2400 Ring Flash Attachments

This Set of Three BD-09 series Honeycomb Grids has been designed for use with the R1200 Ring flash attachment for the CITI1200 Pro (Godox AD1200Pro), and the R2400 Ring flash for the Godox P2400 Pack and Head flash system. designed to be used in conjunction with the R1200 Ring flash for the CITI1200 Pro (Godox AD1200Pro).

Extreme Pro SD UHS-II USB-C Card Reader - 500MB/s (SPECIAL ORDER)

The SanDisk Extreme PRO SD UHS-II Card Reader is a versatile and user-friendly device, designed for computers or laptops with a USB-C interface. Its reversible USB-C connector eliminates the hassle of ensuring the card reader is being plugged correctly, and its compact design ensures it doesn’t block neighbouring USB ports. This high-speed SD card reader is perfect for use on the go. It is capable of lightning-fast transfer speeds with UHS-II cards and is also Backwards-Compatible with UHS-I, Non-UHS SD cards, and microSD cards (with an adapter), the SanDisk Extreme PRO SD UHS-II Card Reader is a flexible solution for all of your data-storage needs.

Hollyland HL-C1PRO-SC02 Solidcom C1 PRO 4 or 6 Head Case (SPECIAL ORDER)

Keep your intercom gear protected and ready to go with the Solidcom C1 (Pro) Carry Case for 4- and 6-headset systems. Built with production teams in mind, this lightweight case offers moisture resistance, internal organisation, and reliable portability for transport between sets or storage during downtime.

Warranty Product PIKA200 PRO Portable Battery Powered TTL Pocket Flash (GODOX AD200 PRO) - 3 years Warranty

Folding Metal Camera Bracket for AD1200 PRO Ring Flash (FLB-02)

This folding bracket (FLB-02) is designed for use with the GODOX R1200 head. It enables you to mount your camera directly to the Ring-flash head to produce unique, near shadow-less illumination more edgy-fashion look. It is also great for on-axis fill light. The Folding Bracket simply screws onto the back of your AD1200 Pro Ring flash head and can be folded to take as little space as possible when being stored.

Dome Gel Diffusion for MagMod Reflector XL and MagBox Pro Softboxes

The MagMod Dome Gels offer precise, nearly indestructible colour control for photographers of all levels. The Dome Gel Full CTO is carefully designed to add warmth to your flash for both colour-balancing needs as well as adding creativity to each shot. Combine multiple Dome Gels for even greater customization of your flash's colour, temperature, or hue. The MagMod Dome Gels are an essential accessory for users of the Reflector XL or the MagBox Pro Series Softboxes. The Gels you have been waiting for.

Warranty Product PIKA200 PRO 200Ws Portable Pocket Round Head Remote Kit (GODOX AD200 PRO) - 3 years Warranty