12.878 results (0,16447 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Fike 540-0020 CIE-A-200 CIE-A-400 Battery Expansion Box

Fike 540-0020 CIE-A-200 CIE-A-400 Battery Expansion Box

Fike 540-0020 CIE-A-200 CIE-A-400 Battery Expansion BoxThe Fike External Battery box provides emergency short-term backup power for the CIE-A-200 CIE-A-400 to enhance the usability and reliability of the systems. The External Battery box safeguards operation during blackouts and other power interruptions providing extended battery run time.Only use an external battery box purchased from Fike Safety Technology which has been approved for use with the CIE-A-200 CIE-A-400 panel will not fit with a flush mounted panel.This must be mounted beneath the CIE-A-200 CIE-A-400 panel. Conduit bushes coupling and battery lead harness are provided with the external battery box kit.When using the external battery box the internal batteries within the panel are not used and must be removed. The internal battery connection leads must also be removed and are replaced by the battery connection leads provided with the external battery box.Key FeaturesAllows a pair of 12ah batteries to be used with CIE-A-200 or CIE-A-400 panel

GBP 152.59
1

Carrier 9-30855-65 EN 54-4 approved 24 V 3 A 2.6 A Intelligent Power Supply A

Carrier 9-30855-65 EN 54-4 approved 24 V 3 A 2.6 A Intelligent Power Supply A

Carrier 9-30855-65 EN 54-4 approved 24 V 3 A 2.6 A Intelligent Power Supply AThe 9-30855-65 is a fully featured 24 V EN54-4 approved power supply ideal for use in fire system applications. The output current is split between the load and charging the batteries. It features intelligent battery charging monitoring and signaling while providing deep discharge protection to prevent premature battery failure when operating from standby for extended periods.

GBP 692.98
1

RGL Electronics 1205SM-2MP A 13.8V DC Power Supply In A Large Housing

RGL Electronics 1205SM-2MP A 13.8V DC Power Supply In A Large Housing

RGL Electronics 1205SM-2MP A 13.8V DC Power Supply In A Large HousingThe 1205SM-2MP is a 13.8V DC power supply in a large housing with a multi-indicator.It includes the Mains Battery PSU monitoring via voltage free outputs and is designed to house up to 2 x 9 Ah battery.Additional battery charging of 300mA - includes Deep Discharge Protection.Key FeaturesBattery mains monitoringMild steel constructionWhite powder coated finishHinged style boxWiring productMore efficient and environmentally friendlyTop. bottom and rear cable entryFront tamperTechnical SpecificationsFull current to load5 Amp PSU13.8VDC regulated outputAdditional battery chargingDeep discharge protectionCurrent limitingShort circuit protectionMains transient protectionCompliant to EMC EN61000-6-1 3Can house 2 batteries up to 12V 9Ah

GBP 123.56
1

Elmdene G13803N-A 12V Switch Mode Power Supply Unit 3A A-Box

Elmdene G13803N-A 12V Switch Mode Power Supply Unit 3A A-Box

Elmdene G13803N-A 12V Switch Mode Power Supply Unit 3A A-BoxThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 3Amp to load 0.5A battery charging.Efficient Switch Mode operation.Multi LED status indication.Fit up to 7Ah battery.A Box 200h x 230w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 60.37
1

RGL Electronics 1205SM-CH A 13.8V DC Switchmode Power Supply Fitted On A Chassis

RGL Electronics 1205SM-CH A 13.8V DC Switchmode Power Supply Fitted On A Chassis

RGL Electronics 1205SM-CH A 13.8V DC Switchmode Power Supply Fitted On A ChassisThe 2401SM-2 is a 13.8vdc switchmode power supply fitted on a chassis. Designed to house up to 9 Ah battery. Load excludes additional battery charging of 500mA.Front tamper and designed to house up to 9 Ah battery. Load excludes additional battery charging of 500mA and product also includes Deep Discharge Protection.Key FeaturesSwitchmode technologyMild steel constructionWhite powder coatedLED Indicators mains battery outputSeperate fused mains connectionsFull electronic protectionOn board tamper protectionConverts power more efficiently switch modeMultiple cable entry inc rearWiring Instructions includedHinged boxTechnical SpecificationsFull current to load13.8V DC regulated outputAdditional battery chargingDeep discharge protectionCurrent limitingShort circuit protectionMains transient protectionCompliant to EMC EN61000-6-1 3Can house a battery up to 12V 9Ah

GBP 96.85
1

Fike 540-0030 CIE-A-200 CIE-A-400 Fire Panel Flush Mount Bezel 540-0030

Fike 540-0030 CIE-A-200 CIE-A-400 Fire Panel Flush Mount Bezel 540-0030

Fike 540-0030 CIE-A-200 CIE-A-400 Fire Panel Flush Mount Bezel 540-0030A specially designed recessing cradle enables seamless installation of the Fike CIE-A-200 1 Loop and CIE-A-400 2 Loop fire panels ensuring a flush appearance. The required cut-out dimensions for securely mounting the control panel are 354mm width x 334mm height. When expertly flush-mounted the panel aligns at a depth of 83mm within the cavity with a 36mm projection from the surface for optimal integration.Product featuresEnables the flush installation of Fike CIE-A-200 1-loop and CIE-A-400 2-loop addressable fire panels.

GBP 72.11
1

Carrier ABT-NSM-A Noise Sensing Microphone for One Controller - Type A

Carrier ABT-NSM-A Noise Sensing Microphone for One Controller - Type A

Carrier ABT-NSM-A Noise Sensing Microphone for One Controller - Type AABT-NSM is measurement microphone which is designed to operate under extreme temperatures. Up to 6 microphones can be connected to ABT-NSC6 via 2-wire cable.The ABT-NSM is available in two housings. Lightweight for indoor applications.Key FeaturesOperates under extreme temperatures2 wire analogue connection up to 300 meters from ABT-NSC6Dimensions 200 x 110 mm

GBP 99.44
1

Cooper CFVCSHP VoCall Type A Surface Mounted Outstation

Cooper CFVCSHP VoCall Type A Surface Mounted Outstation

Cooper CFVCSHP VoCall Type A Surface Mounted OutstationThe VoCALL Type A Outstation is a compact unit which offers easy access via a magnetic push catch or lockable metal door. The Type A Outstation is compatible with all VoCALL systems for use as a standard fire telephone or disabled refuge call point.The Type A Outstation is available in surface mounted flush mounted and IP65 lockable variants with the option of either red or stainless steel finished providing a solution for all commercial buildings.Key FeaturesCompact designHigh volume ringerStatus LEDFull duplex operationStainless steel optionVersatility the unit can be used on all VoCALL systemsDual use the Type A outstation can be used a fire telephone or a disabled refuge call pointMagnetic push catch for quick and easy access

GBP 247.74
1

Cooper CFVCHP VoCall Type A Flush Mounted Outstation

Cooper CFVCHP VoCall Type A Flush Mounted Outstation

Cooper CFVCHP VoCall Type A Flush Mounted OutstationThe VoCALL Type A Outstation is a compact unit which offers easy access via a magnetic push catch or lockable metal door. The Type A Outstation is compatible with all VoCALL systems for use as a standard fire telephone or disabled refuge call point. The Type A Outstation is available in surface mounted flush mounted and IP65 lockable variants with the option of either red or stainless steel finished providing a solution for all commercial buildings.Key FeaturesCompact designHigh volume ringerStatus LEDFull duplex operationStainless steel optionVersatility the unit can be used on all VoCALL systemsDual use the Type A outstation can be used a fire telephone or a disabled refuge call pointMagnetic push catch for quick and easy access

GBP 230.80
1

Carrier 9-30855-18 EN 54-4 approved 24 V 5 A 0.7 A Intelligent Power Supply

Carrier 9-30855-18 EN 54-4 approved 24 V 5 A 0.7 A Intelligent Power Supply

Carrier 9-30855-18 EN 54-4 approved 24 V 5 A 0.7 A Intelligent Power SupplyThe 9-30855-18 is a fully featured 24 V EN54-4 approved power supply ideal for use in fire system applications. The output current is split between the load and charging the batteries. It features intelligent battery charging monitoring and signaling while providing deep discharge protection to prevent premature battery failure when operating from standby for extended periods.On the front of the unit diagnostic LEDs indicate the status of the power supply with various flash patterns to ensure accurate diagnostics when the unit is in fault.The range is available in different size of output currents with support for various sizes of batteries.Installer friendlyThe power supply is supplied in a self-contained wall mounting box that can also house 18 Ah batteries not included.Selection of the battery size is easy with the use of a jumper. Similarly a jumper is used to select between dual-path or two individual outputs. With this feature mission critical applications can be powered ensuring redundancy in the supply of 24 V to the load.On the front of the unit 6 LEDs indicated the status of the power supply. To aid with the interpretation of the meaning of the LEDs a legend is used on the front of the unit. Additionally there is also a diagnostics LED that with different flash patterns indicated even more detailed information.A potential-free contact is used to signal faults due to output failure battery fault charger fault or internal fault. A second potential-free contact signals the loss of mains power.EN 54-4 approved 24 V 5 A 0.7 A intelligent power supplyApproved to EN54-4 VdS certifiedSelf contained box houses 18 Ah batteriesDeep battery discharge protectionDiagnostics leds on front of housing2 x relay outputsDetailsApproved to EN54-4 VdS certifiedSelf contained box houses 18 Ah batteriesDeep battery discharge protectionDiagnostics leds on front of housing2 x relay outputsDual load connection terminalsWide input voltage range

GBP 357.18
1

Kidde Airsense 9-30855-38 EN 54-4 Approved 24 V 4 A 1.5 A Intelligent Power Supply

Kidde Airsense 9-30855-38 EN 54-4 Approved 24 V 4 A 1.5 A Intelligent Power Supply

Kidde Airsense 9-30855-38 EN 54-4 Approved 24 V 4 A 1.5 A Intelligent Power SupplyThe 9-30852-38 is a fully featured 24V EN54-4 approved power supply ideal for use in fire system applications. The output current is split between the load and charging the batteries. It features intelligent battery charging monitoring and signalling while providing deep discharge protection to prevent premature battery failure when operating from standby for extended periods.The power supply is supplied in a self-contained wall mounting box that can also house 38 Ah batteries not included. Selection of the battery size is easy with the use of a jumper. Similarly a jumper is used to select between dual-path or two individual outputs.With this feature mission critical applications can be powered ensuring redundancy in the supply of 24 V to the load.On the front of the unit 6 LEDs indicated the status of the power supply. To aid with the interpretation of the meaning of the LEDs a legend is used on the front of the unit. Additionally there is also a diagnostics LED that with different flash patterns indicated even more detailed information.A potential-free contact is used to signal faults due to output failure battery fault charger fault or internal fault. A second potential-free contact signals the loss of mains power.Key FeaturesProviding deep discharge protectionIntelligent battery charging monitoring and signallingDiagnostics LEDs on front of housingExternal housing for 38Ah batteriesDual load connection terminals2x Relay outputs

GBP 499.93
1

Fike 520-0010 CIE-A-200 Repeater Panel

Fike 520-0010 CIE-A-200 Repeater Panel

Fike 520-0010 CIE-A-200 Repeater PanelThe 520-0010 is a repeater control panel with a built in PSU designed to connect with the Fike CIE-A-200 1 Loop Addressable Fire Alarm Panel.The repeater panel provides control of the system from a remote location to the master panel and up to 8 repeater panels can be installed on a single system.It requires a mains power supply and 2 x 12v 12Ah Sealed Lead Acid batteries for back-up power supply.Key FeaturesRepeater control panel for the Fike CIE-A-200 1 loop addressable fire panelUp to 8 repeater panels can be connected on the same systemAllows control of the system from remote locations to the main fire panelRequires mains supply and 2 x 12v 12Ah SLA batteries

GBP 293.66
1

Kentec K1822-00 Sigma A-XT Ancillary PCB

Kentec K1822-00 Sigma A-XT Ancillary PCB

Kentec K1822-00 Sigma A-XT Ancillary PCBThe Sigma A-XT Ancillary Board is compatible with all Sigma A-XT control panels. The board provides volt-free normally open contacts enabling control of sub systems and plant remotely from the main panel over a two-wire data bus.Ancillary boards require only a two-core data cable from the main control panel and a two-core power cable from the main panel.Up to seven ancillary boards can be connected to a control panel and each is allocated to an address from one to seven using a binary coded DIL switch.The total length of the data cable from the main panel to the last repeater must not exceed 4000 feet.A mixture of status units and Ancillary boards up to a maximum of seven of each type can be connected to the serial data bus.Key FeaturesTwo-wire serial connectionUp to seven per systemVolt-free relay outputs for fire and releasing system statusRelay operated LED indicatorsUL864 and FM listed

GBP 166.76
1

Morley EVCS-HSP Surface Type A Push Door Outstation

Morley EVCS-HSP Surface Type A Push Door Outstation

Morley EVCS-HSP Surface Type A Push Door OutstationThe Type A outstation is a monitored phone handset providing full duplex speech capability. The unit is available as a surface mounting or flush mounting unit cased in a metal wall mounting enclosure. The surface mounted outstation is also available as a lock door option.The Type A Outstation is a slick compact unit which offers easy access via a magnetic push catch door and a unique front levelling system allowing the back box to be mounted at a slight angle whilst still retaining a true front face and door. Available in red and Stainless Steel.Key FeaturesCompact designHigh volume ringerStatus LEDTelecoil for hearing impaired usersFull duplex operationMagnetic push catch for quick and easy accessVersatility the unit can be used on all EVCS systemsDual use the Type A Outstation can be used as a fire telephone or a disabled refuge call point

GBP 316.39
1

Morley EVCS-HFP Flush Type A Push Door Outstation

Morley EVCS-HFP Flush Type A Push Door Outstation

Morley EVCS-HFP Flush Type A Push Door OutstationThe Type A outstation is a monitored phone handset providing full duplex speech capability. The unit is available as a surface mounting or flush mounting unit cased in a metal wall mounting enclosure. The surface mounted outstation is also available as a lock door option.The Type A Outstation is a slick compact unit which offers easy access via a magnetic push catch door and a unique front levelling system allowing the back box to be mounted at a slight angle whilst still retaining a true front face and door. Available in red and Stainless Steel.Key FeaturesCompact designHigh volume ringerStatus LEDTelecoil for hearing impaired usersFull duplex operationMagnetic push catch for quick and easy accessVersatility the unit can be used on all EVCS systemsDual use the Type A Outstation can be used as a fire telephone or a disabled refuge call point

GBP 335.66
1

Zeta TS-OSR Type A Telephone Outstation - Red Handset

Zeta TS-OSR Type A Telephone Outstation - Red Handset

Zeta TS-OSR Type A Telephone Outstation - Red HandsetThe TS-OSR is a Type A Telephone Outstation with a red handset.The Type A Outstation is compatible with the ETS-CP system for use as a standard fire telephone or a disabled refuge call unit.The unit is housed in a metal enclosure allowing duplex communication with LED indication for incoming calls.Key FeaturesEnclosure suitable for either Flush or Surface mountStatus LEDFull duplex operationAutomatically dials the control panel when off hookDual purpose fire telephone or disabled refuge call pointIP23 suitable for indoor use

GBP 323.02
1