20 results (0,14595 seconds)

Show all filters

Brand

Colour

Show all

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Watco Toughline White, 1L - TLINEWHI1

Watco Toughline White, 1L - TLINEWHI1

Images for illustration purposes onlyWatco Toughline incorporates the latest polyaspartic resin technology for a high quality, highly wear resistant line marking paint that can be applied as low as -10C.Recommended areas of usePerfect line marker for unheated warehouses, walk in fridges, cold stores and loading baysParticularly useful for exterior applications as it resists chalking, fading, weathering and UV discolourationFeaturesFlexibleUV resistantTakes heavy wear and tearExcellent chemical resistanceCuring times are dependent on site conditions, but the following can be used as a guide:Curing Times 20C 5C 0C -10CRecoatable 4-5 hrs 10-12 hrs 16 hrs 30 hrsLight Traffic 6-8 hrs 18 hrs 24 hrs 36 hrsHeavy Traffic 12 hrs 24 hrs 36 hrs 48 hrs

GBP 94.99
1

Watco Toughline Yellow, 1L - TLINEYEL1

Watco Toughline Yellow, 1L - TLINEYEL1

Images for illustration purposes onlyWatco Toughline incorporates the latest polyaspartic resin technology for a high quality, highly wear resistant line marking paint that can be applied as low as -10C.Recommended areas of usePerfect line marker for unheated warehouses, walk in fridges, cold stores and loading baysParticularly useful for exterior applications as it resists chalking, fading, weathering and UV discolourationFeaturesFlexibleUV resistantTakes heavy wear and tearExcellent chemical resistanceCuring times are dependent on site conditions, but the following can be used as a guide:Curing Times 20C 5C 0C -10CRecoatable 4-5 hrs 10-12 hrs 16 hrs 30 hrsLight Traffic 6-8 hrs 18 hrs 24 hrs 36 hrsHeavy Traffic 12 hrs 24 hrs 36 hrs 48 hrs

GBP 94.99
1

Watco Moisture Guard Anti-Condensation Paint - 5L

Watco Moisture Guard Anti-Condensation Paint - 5L

Watco Moisture Guard is a high performance, water based, acrylic paint designed to enhance and protect interior surfaces. This anti condensation paint is ideal for areas with persistent humidity, constant temperature fluctuations, insufficient air movement, or other environmental conditions, which can attack the paint film resulting in mould and mildew growth.* Moisture Guard is extremely easy to mix and apply with no sanding or priming required. The satin finish is also scrubbable and moisture resistant, making it easier to keep your surfaces clean. *Moisture Guard contains a biocide to protect the dry film from fungal degradation. Once dried the paint is classed as a treated article and contains a surface biocide 4, 5-dichloro-2-n-octyl-4- isothiazoline-3-one.

GBP 103.99
1

Watco Concrex Coloured Tile Red 10KG

Watco Concrex Coloured Tile Red 10KG

Images for illustration purposes onlyConcrex Colours is a coloured epoxy resin mortar for a better blend with a coloured floor than sand and cement or Watco Concrex. The ideal choice for repairs to floors, steps and ramps for heavy traffic. It can also be used as a coloured screed to provide an attractive, virtually indestructible floor surface. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesCures to a granite-hard finish - virtually indestructibleProvides excellent chemical resistance and anti slip propertiesWatco Tack Coat primer is essential for shall applications and screedingImpervious and non-dustingConcrex Colours cures in 5-6 hours at ambient temperatures, ready for heavy traffic in 8-12 hoursAvailable in 10kg and 25kg packsMay be feather-edged

GBP 152.99
1

Watco Concrex Coloured Blue 10KG

Watco Concrex Coloured Blue 10KG

Images for illustration purposes onlyConcrex Colours is a coloured epoxy resin mortar for a better blend with a coloured floor than sand and cement or Watco Concrex. The ideal choice for repairs to floors, steps and ramps for heavy traffic. It can also be used as a coloured screed to provide an attractive, virtually indestructible floor surface. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesCures to a granite-hard finish - virtually indestructibleProvides excellent chemical resistance and anti slip propertiesWatco Tack Coat primer is essential for shall applications and screedingImpervious and non-dustingConcrex Colours cures in 5-6 hours at ambient temperatures, ready for heavy traffic in 8-12 hoursAvailable in 10kg and 25kg packsMay be feather-edged

GBP 152.99
1

Watco Concrex Coloured Light Grey 10KG

Watco Concrex Coloured Light Grey 10KG

Images for illustration purposes onlyConcrex Colours is a coloured epoxy resin mortar for a better blend with a coloured floor than sand and cement or Watco Concrex. The ideal choice for repairs to floors, steps and ramps for heavy traffic. It can also be used as a coloured screed to provide an attractive, virtually indestructible floor surface. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesCures to a granite-hard finish - virtually indestructibleProvides excellent chemical resistance and anti slip propertiesWatco Tack Coat primer is essential for shall applications and screedingImpervious and non-dustingConcrex Colours cures in 5-6 hours at ambient temperatures, ready for heavy traffic in 8-12 hoursAvailable in 10kg and 25kg packsMay be feather-edged

GBP 152.99
1

Watco Concrex Coloured Green 10KG

Watco Concrex Coloured Green 10KG

Images for illustration purposes onlyConcrex Colours is a coloured epoxy resin mortar for a better blend with a coloured floor than sand and cement or Watco Concrex. The ideal choice for repairs to floors, steps and ramps for heavy traffic. It can also be used as a coloured screed to provide an attractive, virtually indestructible floor surface. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesCures to a granite-hard finish - virtually indestructibleProvides excellent chemical resistance and anti slip propertiesWatco Tack Coat primer is essential for shall applications and screedingImpervious and non-dustingConcrex Colours cures in 5-6 hours at ambient temperatures, ready for heavy traffic in 8-12 hoursAvailable in 10kg and 25kg packsMay be feather-edged

GBP 152.99
1

Watco Concrex Coloured Buff 10KG

Watco Concrex Coloured Buff 10KG

Images for illustration purposes onlyConcrex Colours is a coloured epoxy resin mortar for a better blend with a coloured floor than sand and cement or Watco Concrex. The ideal choice for repairs to floors, steps and ramps for heavy traffic. It can also be used as a coloured screed to provide an attractive, virtually indestructible floor surface. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesCures to a granite-hard finish - virtually indestructibleProvides excellent chemical resistance and anti slip propertiesWatco Tack Coat primer is essential for shall applications and screedingImpervious and non-dustingConcrex Colours cures in 5-6 hours at ambient temperatures, ready for heavy traffic in 8-12 hoursAvailable in 10kg and 25kg packsMay be feather-edged

GBP 152.99
1

Watco Powerfloat Primer Rapid 5L

Watco Powerfloat Primer Rapid 5L

Images for illustration purposes only Enables coatings to be applied to hard, smooth surfaces which would usually reject paint. Avoid using any coating which includes a strong solvent. For more information, please download a product datasheet from the quick links below. Recommended areas of use Priming power floated, very smooth or non porous concrete floors which are prone to rejecting paint Clear Powerfloat Primer can be used on clear ceramic tiles before application of Watco Protecta-Coat Features Powerfloat Primer Rapid curing times: With Watco Epoxy Gloss Coat/Safety Coat: Allow the primer to dry for 3 hours at 15-20C, but no longer than 36 hours, before overcoating With Watco Concrete Floor Paint/Flexicoat and Flexigrip: Allow the primer to dry for at least 5 days before overcoating With Watco Polyaspartic Coatings: Allow the primer to dry for at least 3 hours at 15-20C but no longer than 36 hours before overcoating

GBP 169.99
1

Watco Concrex Coloured Black 10KG

Watco Concrex Coloured Black 10KG

Images for illustration purposes onlyConcrex Colours is a coloured epoxy resin mortar for a better blend with a coloured floor than sand and cement or Watco Concrex. The ideal choice for repairs to floors, steps and ramps for heavy traffic. It can also be used as a coloured screed to provide an attractive, virtually indestructible floor surface. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesCures to a granite-hard finish - virtually indestructibleProvides excellent chemical resistance and anti slip propertiesWatco Tack Coat primer is essential for shall applications and screedingImpervious and non-dustingConcrex Colours cures in 5-6 hours at ambient temperatures, ready for heavy traffic in 8-12 hoursAvailable in 10kg and 25kg packsMay be feather-edged

GBP 152.99
1

Watco SGBUF Safety Grip Buff 5m2

Watco SGBUF Safety Grip Buff 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Safety Grip Safety Yellow 5m2

Watco Safety Grip Safety Yellow 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco SGBLK Safety Grip Black 5m2

Watco SGBLK Safety Grip Black 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Safety Grip Safety Blue 5m2

Watco Safety Grip Safety Blue 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Safety Grip Tile Red 5m2

Watco Safety Grip Tile Red 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Safety Grip Safety Green 5m2

Watco Safety Grip Safety Green 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Safety Grip Light Grey 5m2

Watco Safety Grip Light Grey 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Safety Grip Mid Grey 5m2

Watco Safety Grip Mid Grey 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco PFP5 Powerfloat Primer 5L

Watco PFP5 Powerfloat Primer 5L

Images for illustration purposes only Enables coatings to be applied to hard, smooth surfaces which would usually reject paint. Avoid using any coating which includes a strong solvent. For more information, please download a product datasheet from the quick links below. Recommended areas of use Priming power floated, very smooth or non porous concrete floors which are prone to rejecting paint Clear Powerfloat Primer can be used on clear ceramic tiles before application of Watco Protecta-Coat Features Primes hard, smooth surfaces ready for painting Eliminates the need for costly shot blasting or grinding One coat application: quick and easy to apply Low odour Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Easily applied by roller Curing times: The following is based on good ventilation and a floor temperature of 15 -20C With all epoxy coatings such as Watco Epoxy Gloss Coat or Safety Coat: Allow the Primer to dry for 16 hours, but no longer than 72 hours before overcoating With Watco Concrete Floor Paint, Flexicoat and Safety Grip Flex: Allow the Primer to dry for at least 5 days before overcoating With polyaspartic coatings such as Cold Set Coating or Safety Coat Cold Cure: Allow the primer to dry for at least 16 hours but no longer than 72 hours before overcoating

GBP 153.99
1

Watco Powerfloat Primer 5L, Clear

Watco Powerfloat Primer 5L, Clear

Images for illustration purposes only Enables coatings to be applied to hard, smooth surfaces which would usually reject paint. Avoid using any coating which includes a strong solvent. For more information, please download a product datasheet from the quick links below. Recommended areas of use Priming power floated, very smooth or non porous concrete floors which are prone to rejecting paint Clear Powerfloat Primer can be used on clear ceramic tiles before application of Watco Protecta-Coat Features Primes hard, smooth surfaces ready for painting Eliminates the need for costly shot blasting or grinding One coat application: quick and easy to apply Low odour Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Easily applied by roller Curing times: The following is based on good ventilation and a floor temperature of 15 -20C With all epoxy coatings such as Watco Epoxy Gloss Coat or Safety Coat: Allow the Primer to dry for 16 hours, but no longer than 72 hours before overcoating With Watco Concrete Floor Paint, Flexicoat and Safety Grip Flex: Allow the Primer to dry for at least 5 days before overcoating With polyaspartic coatings such as Cold Set Coating or Safety Coat Cold Cure: Allow the primer to dry for at least 16 hours but no longer than 72 hours before overcoating

GBP 154.99
1