54 results (0,17757 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Vlieseline edgefix 40-10mm graphite 50m

Vlieseline edgefix 40-10mm graphite 50m

PropertiesLightweight fusible tape made from a blend of synthetic fibres with a perforated line. For accurate button plackets, cuffs, slits, etc. Weight 46 g/m2Application areasFor the accurate processing of button plackets, cuffs, slits, pockets and pocket flaps; may also be used for hems on jackets and coats. Suitable for all fabrics.ProcessingLay the interlining with the coated side facing the reverse side of the fabric.Iron for around 8 seconds, section by section, with a damp cloth. Do not push the iron.After fixing, lay the pieces down flat to cool down for around 20 minutes to allow the bond to stabilise.AdvantagesNo pre-markingThe perforated line also serves as a guide for folding and sewingThin, precise edges

GBP 29.00
1

Vlieseline edgefix 40-10mm white 50m

Vlieseline edgefix 40-10mm white 50m

PropertiesLightweight fusible tape made from a blend of synthetic fibres with a perforated line. For accurate button plackets, cuffs, slits, etc. Weight 46 g/m2Application areasFor the accurate processing of button plackets, cuffs, slits, pockets and pocket flaps; may also be used for hems on jackets and coats. Suitable for all fabrics.ProcessingLay the interlining with the coated side facing the reverse side of the fabric.Iron for around 8 seconds, section by section, with a damp cloth. Do not push the iron.After fixing, lay the pieces down flat to cool down for around 20 minutes to allow the bond to stabilise.AdvantagesNo pre-markingThe perforated line also serves as a guide for folding and sewingThin, precise edges

GBP 29.00
1

Vlieseline biastape 12mm white 100m

Vlieseline biastape 12mm white 100m

Properties Mediumweight, bias-cut fusible tape made from synthetic fibres and with a reinforcement stitch. Weight 54 g/m2 Application areas Securing of bias-cut or round edges. Suitable across a wide range of fabrics. Processing The bias tape is 12 mm wide and has a chain stitch at 4/8 mm from the edge. Iron on the tape in such a way that the 8 mm side meets the fabric edge and is sewn right behind the chain stitch. Slowly and firmly iron on for around 8 seconds per section. Iron dry. Advantages Secures and finishes all round and diagonal edges Versatile in application No stretching of the edges thanks to the chain stitch Flat, soft stitch-and-fold edges

GBP 82.00
1

Vlieseline biastape 12mm graphite 100m

Vlieseline biastape 12mm graphite 100m

Properties Mediumweight, bias-cut fusible tape made from synthetic fibres and with a reinforcement stitch. Weight 54 g/m2 Application areas Securing of bias-cut or round edges. Suitable across a wide range of fabrics. Processing The bias tape is 12 mm wide and has a chain stitch at 4/8 mm from the edge. Iron on the tape in such a way that the 8 mm side meets the fabric edge and is sewn right behind the chain stitch. Slowly and firmly iron on for around 8 seconds per section. Iron dry. Advantages Secures and finishes all round and diagonal edges Versatile in application No stretching of the edges thanks to the chain stitch Flat, soft stitch-and-fold edges

GBP 82.00
1

Vlieseline batting P140 white

Vlieseline batting P140 white

Properties Medium-weight, voluminous sewable wadding with a flame-resistant finish, made of synthetic fibres. Weight 140 g/m2 Application areas For patchwork and quilting, duvets, baby rugs, upholstery as well as warm and functional clothing such as jackets, coats or protective clothing. Suitable for all fabrics. Processing Simply lay underneath and sew together; quilt with a spacing of max. 15 cm. Quilting spacing: 15 cm. Sew in by hand or using a sewing machine. Advantages Flame retardant finish Lightweight, soft PES batting Versatile applications No fibre migration Retains its shape even after washing

GBP 13.75
1

Vlieseline stitch-n-tear stickvlieswhite

Vlieseline stitch-n-tear stickvlieswhite

Properties Sewable, tear-off embroidery backing. Weight 40g/m2 Application areas Backing for embroidery and appliqué, sewing aid for the individual design and production of patchwork patterns and stitching work and for the transfer of motifs to the right side of fabrics. Suitable for all fabrics. Also suitable to use with embroidery hoop. Processing Tack a piece of Stitch-n-Tear which is a little larger than the motif underneath the fabric. Embroider your desired motif. Then simply tear off the Stitch-n-Tear. Advantages Exact results No stretching of the fabrics Easy to mark with a soft pencil Can be torn out

GBP 3.75
1

Vlieseline quickscreen square

Vlieseline quickscreen square

FeaturesMedium-weight non-woven interfacing for patchwork made of mixed synthetic fibers with a printed blue pattern at a 90° angle. Fields are 1x1 cm. Without adhesive side. Weighs 50g/m2, width 90cm.ApplicationFor patchwork projects with precise and accurate processing of fabric strips. Suitable for all fabrics.Treatment1. Cut a fabric square and fabric strips in different sizes, as well as a Rasterquick square in the desired size. Place the fabric square centered with the right side up on the unprinted back of the Rasterquick. Place the fabric strip on the square with the right sides of the fabric facing each other, and stitch both fabrics across at the beginning and end of the fabric strip.2. Turn the work over and sew along the fabric square using the printed line (remember seam allowance).3. Turn the work over again and cut fabric strips in the course of the square.4. Work your way through the entire Rasterquick square piece in this way.Advantages• Quick, precise work• Ideal for geometric patterns• Uniform appearance

GBP 7.50
1

Vlieseline volume fleece cotton 277

Vlieseline volume fleece cotton 277

Properties Lightweight, soft sewable wadding made from pure cotton. Weight 80 g/m2 Application areas For patchwork, quilting and for warm clothing, such as jackets and coats. Suitable for all fabrics. Processing Sew in by hand or using a sewing machine. Simply lay underneath and sew together. Quilting spacing max. 10 cm. A pre-wash is only required if you wish to avoid later shrinkage. Advantages Lightweight, extremely soft cotton batting Perfect for quilting No fibre migration Retains its shape even after washing 100% cotton

GBP 12.00
1

Vlieseline sew-in interlining L11 white

Vlieseline sew-in interlining L11 white

Properties Lightweight, soft sew-in nonwovens interlining made from a blend of synthetic fibres. Weight 32 g/m2 Application areas For the fusing of small parts and front parts in blouses and dresses and for handicrafts. Suitable for lightweight fabrics such as crushed and pleated fabrics which are heat sensitive and unable to be ironed. Processing Sew in by hand or using a sewing machine. Quilt spacing 15 cm Advantages Easy to sew in Washable up to 60° Percentage of recycled polyester Soft, comfortable texture

GBP 4.75
1

Vlieseline waist-shaper black 50m

Vlieseline waist-shaper black 50m

Properties Heavyweight fusible tape made from a blend of synthetic fibres with perforated lines that serve as a guideline while sewing and define a fold. Weight 90 g/m2 Application areas For the accurate processing of skirt and trouser waistbands without chalking and marking. Suitable for medium- to heavyweight fabrics. Processing Cut the Waist-Shaper to size and iron it onto the fabric waistband with dry heat and pressure. Fold the waistband in the middle and pre-iron the upper waistband edge. Sew the waistband to the skirt (or trousers) along the perforated line. Stitch and fold the edge and, if desired, sew the skirt or trouser lining onto the waistband. Then stitch the hemmed waistband through the seam on the right side. Advantages No marking or drawing of fold lines Effective and easy to use Thin, precise edges

GBP 38.00
1

Vlieseline waist-shaper white 50m

Vlieseline waist-shaper white 50m

Properties Heavyweight fusible tape made from a blend of synthetic fibres with perforated lines that serve as a guideline while sewing and define a fold. Weight 90 g/m2 Application areas For the accurate processing of skirt and trouser waistbands without chalking and marking. Suitable for medium- to heavyweight fabrics. Processing Cut the Waist-Shaper to size and iron it onto the fabric waistband with dry heat and pressure. Fold the waistband in the middle and pre-iron the upper waistband edge. Sew the waistband to the skirt (or trousers) along the perforated line. Stitch and fold the edge and, if desired, sew the skirt or trouser lining onto the waistband. Then stitch the hemmed waistband through the seam on the right side. Advantages No marking or drawing of fold lines Effective and easy to use Thin, precise edges

GBP 38.00
1

Vlieseline woven interlining G785 black

Vlieseline woven interlining G785 black

Properties Lightweight, very fine fusible woven interlining made from synthetic fibres. Weight 30 g/m2 Application areas For the fusing of small parts in blouses and dresses and front parts of elastic jackets. Suitable for lightweight, transparent and sensitive fabrics. Processing As with all interlinings from Vlieseline, this woven interlining is always cut lengthwise following the direction of the thread. Place the interlining on the reverse side of the fabric with the coated side facing down and initially fix in place at a few points at a low temperature to prevent warping. Then cover with a damp cloth and iron on thoroughly, section by section, for around 8 seconds. Do not push the iron. After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Two-way stretch Excellent bond on difficult fabrics such as viscose, acetate, cupro and coated fabrics Very comfortable to wear Soft, comfortable texture

GBP 9.75
1

Vlieseline woven interlining G785 white

Vlieseline woven interlining G785 white

Properties Lightweight, very fine fusible woven interlining made from synthetic fibres. Weight 30 g/m2 Application areas For the fusing of small parts in blouses and dresses and front parts of elastic jackets. Suitable for lightweight, transparent and sensitive fabrics. Processing As with all interlinings from Vlieseline, this woven interlining is always cut lengthwise following the direction of the thread. Place the interlining on the reverse side of the fabric with the coated side facing down and initially fix in place at a few points at a low temperature to prevent warping. Then cover with a damp cloth and iron on thoroughly, section by section, for around 8 seconds. Do not push the iron. After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Two-way stretch Excellent bond on difficult fabrics such as viscose, acetate, cupro and coated fabrics Very comfortable to wear Soft, comfortable texture

GBP 9.75
1

Vlieseline Framilastic 9mm transp. 150m

Vlieseline Framilastic 9mm transp. 150m

Properties Sewable tape of a very high and permanent elasticity. Weight 160 g/m2 Application areas For the securing of elastic seams, e.g. shoulder seams of ladies' wear, lingerie, swimwear and sportswear and also for creative accents such as gathers, ripples and ruffles. Processing Cut the Framilastic shorter than the section to be sewn – depending on how much of a gather you wish to create. At the start of your gather, sew on approx. 1 cm of tape smoothly (with a zigzag stitch, and please don’t forget to fix the underlap). Then stretch the tape the desired length and sew it on while under tension. At the end, you must again fix the underlap. When working with Framalistic, the transparent tape should always be sewn in the centre. This ensures it is even and sits evenly. Important: When washing, do not use softener. Advantages High tear resistance Resistant to chlorine Friendly on the skin

GBP 98.00
1

Vlieseline biastape 12mm white 5m

Vlieseline biastape 12mm white 5m

FeaturesMedium-weight, bias-cut fusible tape made of synthetic fibers and with a reinforcement seam. Weight 54 g/m2ApplicationFor stabilizing bias or curved cut edges. Suitable for many types of fabric.InstructionsThe tape is 12 mm wide and chain-stitched with a 4/8 mm edge distance. Iron the tape on so that the 8 mm edge is aligned with the fabric edge and sew directly behind the chain stitch.Iron slowly without steam and with pressure, about 8 seconds per point.BenefitsSecures and fastens all round and bias cutsWide range of applicationsNo stretching in the edges due to chain stitchFlat, soft, sewn edges

GBP 5.50
1

Vlieseline biastape 12mm black 5m

Vlieseline biastape 12mm black 5m

FeaturesMedium-weight, bias-cut fusible tape made of synthetic fibers and with a reinforcement seam. Weight 54 g/m2ApplicationFor stabilizing bias or curved cut edges. Suitable for many types of fabric.InstructionsThe tape is 12 mm wide and chain-stitched with a 4/8 mm edge distance. Iron the tape on so that the 8 mm edge is aligned with the fabric edge and sew directly behind the chain stitch.Iron slowly without steam and with pressure, about 8 seconds per point.BenefitsSecures and fastens all round and bias cutsWide range of applicationsNo stretching in the edges due to chain stitchFlat, soft, sewn edges

GBP 5.50
1

Vlieseline wundaweb 30mm transp. 100m

Vlieseline wundaweb 30mm transp. 100m

Properties Iron-on tape with adhesive and without transfer paper. Weight 25 g/m2 Application areas For joining layers of fabric, e.g. the fast and easy production of hems by ironing. Fast and easy securing of hems by ironing, sewing ist no longer required. Suitable for all fabrics. Processing Finish the hem edge and iron in a hem. Insert Wundaweb into the hem. Iron on with a damp cloth for around 10 seconds, section by section. Do not push the iron. After fixing, lay the pieces out flat to cool off for 20 minutes. Advantages Quick to iron on Perfect final look without needle holes

GBP 38.00
1

Vlieseline interlining Decovil I beige

Vlieseline interlining Decovil I beige

Properties Heavyweight, dimensionally stable and resilient iron-on interining with a leather-like handle. Weight 400 g/m2 Application areas For creative work such as bags, hats, belts etc. and for interior design. Suitable for cotton, decorative and synthetic fabrics. Processing Lay the interlining with the coated side facing the reverse side of the fabric. Cover with a damp cloth and iron for around 6 seconds, section by section. Do not push the iron. After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Dimensionally stable High resilience Resistant to bending Extremely resistant to tearing Non-fraying Easy to sew in

GBP 18.00
1

Vlieseline interlining Decovil I l. beig

Vlieseline interlining Decovil I l. beig

Properties Lighterweight, dimensionally stable and resilient iron-on interlining with a leather-like handle. Weight 240 g/m2 Application areas For creative work such as bags, hats, belts etc. and for interior design. Suitable for cotton, decorative and synthetic fabrics. Processing Lay the interlining with the coated side facing the reverse side of the fabric. Cover with a damp cloth and iron for around 6 seconds, section by section. Do not push the iron. After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Dimensionally stable High resilience Resistant to bending Extremely resistant to tearing Non-fraying Can be punched in several layers if required Very easy to sew in Suitable for stitching and turning

GBP 16.00
1

Vlieseline woven interlining G770 black

Vlieseline woven interlining G770 black

Properties Mediumweight fusible woven interlining made from synthetic fibres. The bulky yam gives it a very soft surface. Weight 70 g/m2 Application areas For the fusing of small parts and front parts of men's jackets, blazers and jackets as well as trouser or skirt waistbands. Suitable for medium- to heavyweight and sensitive fabrics. Processing As with all interlinings from Vlieseline, this woven interlining is always cut lengthwise following the direction of the thread. Place the interlining on the reverse side of the fabric with the coated side facing down, cover with a damp cloth and iron section by section for around 8 seconds. Do not push the iron. After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Balanced combination of softness, volume and resilience Very well suited for universal use on modern cover fabrics for complete front fusings and small pieces Extremely resistant to washing Excellent bond After fixing

GBP 9.75
1

Vlieseline fuse-n-tear white

Vlieseline fuse-n-tear white

Properties Temporary iron-on, tear-off embroidery backing. Weight 48 g / m2 Application areas For stabilising the fabric to ensure perfect and non-puckering embroidery design; can be used as a template for creative work and for embroidery and appliqués on elastic fabrics. Interlining can be printed with an ink-jet printer. Suitable for all fabrics, especially elastic outer fabrics. Processing Free embroidery and thread art: Iron on the Fuse-n-Tear Embroider your motif, then tear off. Helps you create patchwork, topstiching and quilts: Draw motifs on the Fuse-n-Tear and iron it onto the right side of the piece. Embroider the motif using your drawing as a template and then tear off the Fuse-n-Tear. Advantages Can be ironed on, but not permanently bonding Lets you create clean embroidery on stretchy fabrics and is easy to remove Can be used like freezer paper on patchwork quilts and creative projects

GBP 4.25
1

Vlieseline woven interlining G770 white

Vlieseline woven interlining G770 white

Properties Mediumweight fusible woven interlining made from synthetic fibres. The bulky yam gives it a very soft surface. Weight 70 g/m2 Application areas For the fusing of small parts and front parts of men's jackets, blazers and jackets as well as trouser or skirt waistbands. Suitable for medium- to heavyweight and sensitive fabrics. Processing As with all interlinings from Vlieseline, this woven interlining is always cut lengthwise following the direction of the thread. Place the interlining on the reverse side of the fabric with the coated side facing down, cover with a damp cloth and iron section by section for around 8 seconds. Do not push the iron. After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Balanced combination of softness, volume and resilience Very well suited for universal use on modern cover fabrics for complete front fusings and small pieces Extremely resistant to washing Excellent bond After fixing

GBP 9.75
1

Vlieseline batting soya mix 278

Vlieseline batting soya mix 278

FeaturesMedium-weight, very soft volume fleece made of soya and cotton for sewing. Weighs 135g/m2, width 150cm.ApplicationFor quilted blankets, quilts, wall hangings, and lightweight clothing such as jackets and coats.Suitable for all fabrics.TreatmentSew by hand or machine.1. When sewing through, keep a maximum distance of 20 cm between seams.2. Pre-washing is only necessary if you want to avoid shrinkage later. Do not wring, but press lightly and dry flat.Advantages• Lightweight and soft• Cooling• Soy fibers are antimicrobial

GBP 19.00
1