Promydea.it | Web Agency Sicilia

Pepperl Fuchs KFD0-CS-Ex1.54 Repeater Barrier

Pepperl Fuchs KFD0-CS-Ex1.54 Repeater BarrierThis isolated barrier is used for intrinsic safety applications. It provides control and signal transfer for SMART compatible fire and smoke alarm transmitters inside hazardous areas. Digital signals may be superimposed AC up to 6 V on the analogue values in the hazardous or safe area and are transferred bidirectional.The current in the hazardous area must be bigger than 1 mA. Since this isolator is loop-powered use the technical data to verify that proper voltage is available to the field devices.

GBP 429.31

1

Pepperl amp Fuchs KCD2-SLD-EX1.1065 Solenoid Driver

Pepperl Fuchs KCD2-SLD-EX1.1065 Solenoid DriverThis isolated barrier is used for intrinsic safety applications. It supplies power to solenoids LEDs and audible alarms located in a hazardous area. The device is controlled with a loop powered signal or a bus powered logic signal. The device is immune to the test pulses of various control systems. The device simulates a minimum load at the input. The minimum load can be activated and de-activated. The line fault transparency function can display a line fault in the field by a change in impedance at the switching input of the solenoid driver. A line fault is indicated by a red LED and output via the fault indication output or a switch contact.Key Features1-channel isolated barrier24 V DC supply bus or loop poweredOutput 65 mA at 10 V DCLine fault transparency LFTTest pulse immunityHousing width 12.5 mmUp to SIL 3 acc. to IECEN 61508

GBP 341.28

1

Pepperl amp Fuchs KFD0-CS-EX2.54 Repeater

Pepperl Fuchs KFD0-CS-EX2.54 RepeaterThis isolated barrier is used for intrinsic safety applications. It provides control and signal transfer for SMART compatible fire and smoke alarm transmitters inside hazardous areas. Digital signals may be superimposed on the analog values in the hazardous or safe area and are transferred bidirectionally. The fall time of the digital signal must be less than 50 s the current in the hazardous area must be bigger than 1 mA. Since this isolator is loop-powered use the technical data to verify that proper voltage is available to the field devices.Details2-channel isolated barrier24 V DC supply loop poweredSMART fire alarm inputCurrent input 1 mA ... 20 mAUp to SIL 3 acc. to IECEN 61508

GBP 752.74

1

Pepperl Fuchs KFD0-CS-EX1.51P Current Driver Repeater Single Channel

Pepperl Fuchs KFD0-CS-EX1.51P Current Driver Repeater Single ChannelThis isolated barrier is used for intrinsic safety applications. It transfers DC signals from fire alarms smoke alarms and temperature sensors in hazardous areas. It can also be used to control IP converters power solenoids LEDs and audible alarms.Reverse polarity protection prevents damage to the isolator caused by faulty wiring. Since this isolator is loop powered use the technical data to verify that proper voltage is available to the field devices.

GBP 238.70

1

Pepperl Fuchs KFD0-CS-Ex2.51P Current Driver Repeater 2 Channel

Pepperl Fuchs KFD0-CS-Ex2.51P Current Driver Repeater 2 ChannelThis isolated barrier is used for intrinsic safety applications. It transfers DC signals from fire alarms smoke alarms and temperature sensors in hazardous areas. It can also be used to control IP converters power solenoids LEDs and audible alarms.Reverse polarity protection prevents damage to the isolator caused by faulty wiring. Since this isolator is loop powered use the technical data to verify that proper voltage is available to the field devices.This product replaces the MTL 5561.

GBP 388.58

1

Pepperl amp Fuchs KCD0-SD3-EX1.1045 Solenoid Driver

Pepperl Fuchs KCD0-SD3-EX1.1045 Solenoid DriverThis isolated barrier is used for intrinsic safety applications. It supplies power to solenoids LEDs and audible alarms located in a hazardous area. It is loop powered so the available energy at the output is received from the input signal. The output signal has a resistive characteristic. As a result the output voltage and current are dependent on the load and the input voltage. At full load 11 V at 80 mA is available for the hazardous area application.Details2-channel isolated barrier24 V DC supply loop poweredOutput 45 mA at 12 V DCTest pulse immunityHousing width 12.5mmUp to SIL 3 acc. to IECEN 61508

GBP 193.61

1

Pepperl Fuchs KCD0-SD-EX1.1245 Solenoid Driver

Pepperl Fuchs KCD0-SD-EX1.1245 Solenoid DriverThis isolated barrier is used for intrinsic safety applications.The device supplies power to solenoids LEDs and audible alarms located in a hazardous area.The device is loop powered so the available energy at the output is received from the input signal. The output signal has a resistive characteristic. As a result the output voltage and current are dependent on the load and the input voltageAt full load 12 V at 45 mA is available for the hazardous area application.Key Features1-channel isolated barrier24 V DC supply loop poweredCurrent limit 45 mA at 12 V DCHousing width 12.5 mmUp to SIL 3 acc. to IECEN 61508

GBP 250.44

1

Pepperl amp Fuchs KFD0-SD2-EX1.10100 Solenoid Driver

Pepperl Fuchs KFD0-SD2-EX1.10100 Solenoid DriverThis isolated barrier is used for intrinsic safety applications. It supplies power to solenoids LEDs and audible alarms located in a hazardous area. It is loop powered so the available energy at the output is received from the input signal. The output signal has a resistive characteristic. As a result the output voltage and current are dependent on the load and the input voltage. At full load 10 V at 100 mA is available for the hazardous area application.Details 1-channel isolated barrier 24 V DC supply loop powered Current limit 100 mA at 10 V DC Up to SIL 3 acc. to IECEN 61508

GBP 268.33

1

Pepperl amp Fuchs KFD0-SD2-EX1.1180 Solenoid Driver

Pepperl Fuchs KFD0-SD2-EX1.1180 Solenoid DriverThis isolated barrier is used for intrinsic safety applications. It supplies power to solenoids LEDs and audible alarms located in a hazardous area. It is loop powered so the available energy at the output is received from the input signal. The output signal has a resistive characteristic. As a result the output voltage and current are dependent on the load and the input voltage. At full load 11 V at 80 mA is available for the hazardous area application.Details 1-channel isolated barrier 24 V DC supply loop powered Current limit 80 mA at 11 V DC Up to SIL 3 acc. to IECEN 61508

GBP 260.06

1

Pepperl amp Fuchs KFD0-SD2-EX2.1545 Solenoid Driver

Pepperl Fuchs KFD0-SD2-EX2.1545 Solenoid DriverThis isolated barrier is used for intrinsic safety applications. It supplies power to solenoids LEDs and audible alarms located in a hazardous area. It is loop powered so the available energy at the output is received from the input signal. The output signal has a resistive characteristic. As a result the output voltage and current are dependent on the load and the input voltage. At full load 11 V at 80 mA is available for the hazardous area application.Details2-channel isolated barrier24 V DC supply loop poweredOutput 45 mA at 12 V DCTest pulse immunityUp to SIL 3 acc. to IECEN 61508

GBP 362.21

1

Pepperl amp Fuchs KFD0-SD2-EX1.1065 Solenoid Driver

Pepperl Fuchs KFD0-SD2-EX1.1065 Solenoid DriverThis isolated barrier is used for intrinsic safety applications. It supplies power to solenoids LEDs and audible alarms located in a hazardous area. It is loop powered so the available energy at the output is received from the input signal. The output signal has a resistive characteristic. As a result the output voltage and current are dependent on the load and the input voltage. At full load 11 V at 80 mA is available for the hazardous area application.Details 1-channel isolated barrier 24 V DC supply loop powered Current limit 80 mA at 11 V DC Up to SIL 3 acc. to IECEN 61508

GBP 243.10

1

Pepperl Fuchs KFD0-CS-EX1.54-Y2 Repeater

Pepperl Fuchs KFD0-CS-EX1.54-Y2 RepeaterThis isolated barrier is used for intrinsic safety applications. It provides control and signal transfer for SMART compatible fire and smoke alarm transmitters inside hazardous areas.The typical application for the barrier is connection of a fire detector loop to a control panel through a System Sensor translator device typically an IST200.The fall time of the digital signal must be less than 50s the current in the hazardous area must be bigger than 1 mA.Since this isolator is loop-powered use the technical data to verify that proper voltage is available to the field devices.Key Features1-channel isolated barrier24 V DC supply loop poweredSMART fire alarm inputCurrent input 1 mA ... 20 mA

GBP 538.52

1

Pepperl Fuchs KCD0-SD3-EX1.1245 Solenoid Driver

Pepperl Fuchs KCD0-SD3-EX1.1245 Solenoid DriverThis isolated barrier is used for intrinsic safety applications.The device supplies power to solenoids LEDs and audible alarms located in a hazardous area.The device is loop powered so the available energy at the output is received from the input signal. The output signal has a resistive characteristic. As a result the output voltage and current are dependent on the load and the input voltageAt full load 12 V at 45 mA is available for the hazardous area application.Key Features1-channel isolated barrier24 V DC supply loop poweredCurrent limit 45 mA at 12 V DCTest pulse immunityHousing width 12.5 mmUp to SIL 3 acc. to IECEN 61508

GBP 240.50

1

Realizziamo gli obiettivi di business dei nostri clienti: dicci cosa ti serve, lo realizzeremo per te.

Brand

Merchant

Price (EUR)