39 results (0,19853 seconds)

Show all filters

Brand

Colour

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

KAISER + KRAFT GMBH Fydor 5-fold Compartment Locker 2 Compartments Blue Grey/light Grey 793746 793677

KAISER + KRAFT GMBH Fydor 5-fold Compartment Locker 2 Compartments Blue Grey/light Grey 793746 793677

Telescopic loader, height adjustable in 5 levels, max. load 1250 - 8000 kg, zinc plated. Supplied = assembled. Weight = 290 kg. Colour = zinc plated. Product type = load arms. Fork pocket dimensions = 188x88 mm. When the range or lifting height of a forklift is not sufficient. Where the load can only be accessed from above. Safety chain. With safety chain. The type RKT-8 telescopic loader/crane arm is the ideal attachment to extend the reach of your forklift truck. Even picking up a load from a height won't be a problem any more when using the type RKT crane arm. The internal section can be extended to 6 times its length and be secured in any position using a socket pin. When fully extended, the crane arm has a total length of 3670 mm, whereby the basic unit has a length of 2170 mm. The telescopic loaders have a max. load of 1250 kg to 8000 kg. An additional chain safety device prevents the load from slipping off the forks. This attachment turns a forklift truck into a crane in a matter of seconds. Attention! Observe the max. load diagram for the stacker.

GBP 9999.99
1

KAISER + KRAFT GMBH Perforated Sheet Support for IBC Funnel Extra Large Zinc Plated

KAISER + KRAFT GMBH Perforated Sheet Support for IBC Funnel Extra Large Zinc Plated

Perforated sheet support, for IBC funnel XL, zinc plated. Supplied = assembled. Height = 1191 mm. Width = 981 mm. Depth = 150 mm. Colour = zinc plated. Model = with perforations. For media = for water hazardous and aggressive liquids, oils and lubricants. Product type = accessories for funnels. Zinc plated perforated plate support for depositing small containers safely and directly in the funnel. Creates an absolutely flat surface in the funnel to prevent the containers from tipping over. Enables separate drainage of any residual liquids escaping from the container. Made of extremely robust, zinc plated sheet steel for placement the funnel. Material thickness 1.5 mm.

GBP 279.99
1

KAISER + KRAFT GMBH Bracket for Stop Blocks for Size 46 Zinc Plated Pack of 10

KAISER + KRAFT GMBH Bracket for Stop Blocks for Size 46 Zinc Plated Pack of 10

Bracket for stop blocks, for size 46, zinc plated, pack of 10. Length = 224 mm. Width = 90 mm. Material = steel. Colour = zinc plated. Product type = accessories. Enables safe storage of truck wheel chocks/stop blocks. Without assembly material. The stop block bracket ensures that wheel chocks for vehicles, and trucks in particular, are fitted correctly. The stop block bracket can be secured on a loading ramp.

GBP 59.99
1

KAISER + KRAFT GMBH Bracket for Stop Blocks for Size 53 Zinc Plated Pack of 10

KAISER + KRAFT GMBH Bracket for Stop Blocks for Size 53 Zinc Plated Pack of 10

Bracket for stop blocks, for size 53, zinc plated, pack of 10. Length = 260 mm. Width = 90 mm. Material = steel. Colour = zinc plated. Product type = accessories. Enables safe storage of truck wheel chocks/stop blocks. Without assembly material. The stop block bracket ensures that wheel chocks for vehicles, and trucks in particular, are fitted correctly. The stop block bracket can be secured on a loading ramp.

GBP 59.99
1

KAISER + KRAFT GMBH End Stop for Space Pallet Racking Zinc Plated for Support Beam 2750mm

KAISER + KRAFT GMBH End Stop for Space Pallet Racking Zinc Plated for Support Beam 2750mm

End stop for Space pallet racking, zinc plated, for support beam 2750 mm. Supplied = flat pack. Colour = zinc plated. Length = 2750 mm. Material = steel. Product type = accessories for pallet racking. Prevents the pallet from being pushed in too far. Safe working environment and protection of goods. The complete pallet racking consists of just two components: the upright frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more.

GBP 89.99
1

KAISER + KRAFT GMBH Shelf for Space Pallet Racking WxD 455 x 1100mm Max. Shelf Load 200 kg

KAISER + KRAFT GMBH Shelf for Space Pallet Racking WxD 455 x 1100mm Max. Shelf Load 200 kg

Shelf for Space pallet racking, WxD 455 x 1100 mm, max. shelf load 200 kg. Supplied = flat pack. Width = 455 mm. Depth = 1100 mm. Material = steel. Colour = zinc plated. Max. load = 200 kg. Product type = accessories for pallet racking. Beam levels for storage of goods without pallets. Suitable if you wish to store individual goods in your pallet racking. Space pallet racking units are robust pallet racking units made of steel. The complete pallet racking consists of just two components, the upright frames and the beams. All load bearing components are labelled with the max. load.

GBP 79.99
1

KAISER + KRAFT GMBH End Stop for Space Pallet Racking Zinc Plated for Support Beam 1850mm

KAISER + KRAFT GMBH End Stop for Space Pallet Racking Zinc Plated for Support Beam 1850mm

End stop for Space pallet racking, zinc plated, for support beam 1850 mm. Supplied = flat pack. Colour = zinc plated. Length = 1850 mm. Material = steel. Product type = accessories for pallet racking. Prevents the pallet from being pushed in too far. Safe working environment and protection of goods. The complete pallet racking consists of just two components: the upright frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more.

GBP 62.99
1

KAISER + KRAFT GMBH Pull-out Shelf for Space Pallet Racking WxD 890 x 1150mm Max. Shelf Load 300 kg

KAISER + KRAFT GMBH Pull-out Shelf for Space Pallet Racking WxD 890 x 1150mm Max. Shelf Load 300 kg

Pull-out shelf for Space pallet racking, WxD 890 x 1150 mm, max. shelf load 300 kg. Supplied = flat pack. Width = 890 mm. Depth = 1100 mm. Material = steel. Colour = zinc plated. Max. load = 300 kg. Product type = accessories for pallet racking. Maximisation of order picking stations for goods without pallet handling. Optimisation of the time needed for order picking by increasing the number of picking stations. Pull-out shelf for installation in Space pallet racking. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. All load bearing components are labelled with the max. load.

GBP 499.99
1

KAISER + KRAFT GMBH Drip Tray for Cantilever Arm Shelf Trolleys Pack of 2 LxW 1709 x 400mm

KAISER + KRAFT GMBH Drip Tray for Cantilever Arm Shelf Trolleys Pack of 2 LxW 1709 x 400mm

Drip tray, for cantilever arm shelf trolleys, pack of 2, LxW 1709 x 400 mm. Material = steel. Colour = zinc plated. Length = 1709 mm. Width = 400 mm. Product type = accessories. Accessory for eurokraft pro cantilever arm shelf trolleys. For collecting dripping liquids. Made of zinc plated steel, robust and durable. Easy installation and fast attachment. Keeps the floor clean and dry. Minimises the risk of accidents due to dripping liquids. The eurokraft pro drip tray is a practical accessory that has been developed for use with the eurokraft pro cantilever arm shelf trolley. This tray is used to catch and collect dripping liquids such as water, oil and paint and thereby keep the floor clean. Loose, small objects that fall off components, for example, are also collected in the tray. Made of zinc plated steel, the drip tray is robust, durable and resistant to liquids. Easy installation allows it to be attached to your existing eurokraft pro cantilever arm shelf trolley quickly. The drip tray ensures that your work environment remains dry and clean, while minimising the risk of accidents caused by spilled liquids. Ideal for workshops, warehouses and industrial use.

GBP 599.99
1

KAISER + KRAFT GMBH Dividers Steel Zinc Plated Pack of 2 Width 700mm

KAISER + KRAFT GMBH Dividers Steel Zinc Plated Pack of 2 Width 700mm

Dividers, steel, zinc plated, pack of 2, width 700 mm. Supplied = pre-assembled, final assembly by customer. Material = steel. Finish = zinc plated by galvanization. Height = 300 mm. Length = 30 mm. Width = 700 mm. For pallet size = 1050x700 mm. Colour = zinc plated. Type of mounting = wing screw clamp. Product type = accessories. Accessories for assembly trolley, shelf and cardboard box trolleys. Flexibly adjustable dividers on a shelf. Easy installation using wing screws. Clamping range covers a panel thickness of up to 40 mm. Pack of 2. Width 700 mm for CustomLine assembly trolleys and shelf trucks. The dividers for flexible adjustment can be attached to the shelves on transport equipment such as assembly trolleys, shelf trucks or cardboard box trolleys. Assembly is straightforward and is performed by clamping using wing screws. The dividers make it easy to organise goods or cardboard boxes according to number, size and intended use. The spacing between the brackets can be individually adjusted and adapted to suit requirements. The dividers are available in widths of 700 mm and 800 mm and are suitable for trolleys with the corresponding widths. The 700 mm wide dividers are suitable as accessories for CustomLine assembly trolleys and shelf trucks.

GBP 159.99
1

KAISER + KRAFT GMBH Dividers Steel Zinc Plated Pack of 2 Width 800mm

KAISER + KRAFT GMBH Dividers Steel Zinc Plated Pack of 2 Width 800mm

Dividers, steel, zinc plated, pack of 2, width 800 mm. Supplied = pre-assembled, final assembly by customer. Material = steel. Finish = zinc plated by galvanization. Height = 300 mm. Length = 30 mm. Width = 800 mm. For pallet size = 1250x800 mm. Colour = zinc plated. Type of mounting = wing screw clamp. Product type = accessories. Accessories for assembly trolley, shelf and cardboard box trolleys. Flexibly adjustable dividers on a shelf. Easy installation using wing screws. Clamping range covers a panel thickness of up to 40 mm. Pack of 2. Width 700 mm for CustomLine assembly trolleys and shelf trucks. The dividers for flexible adjustment can be attached to the shelves on transport equipment such as assembly trolleys, shelf trucks or cardboard box trolleys. Assembly is straightforward and is performed by clamping using wing screws. The dividers make it easy to organise goods or cardboard boxes according to number, size and intended use. The spacing between the brackets can be individually adjusted and adapted to suit requirements. The dividers are available in widths of 700 mm and 800 mm and are suitable for trolleys with the corresponding widths. The 700 mm wide dividers are suitable as accessories for CustomLine assembly trolleys and shelf trucks.

GBP 163.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 2000 x 800mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 2000 x 800mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 2000 x 800 mm, max. load 9000 kg Supplied = flat pack. Height = 2000 mm. Width = 90 mm. Depth = 800 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 169.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 2000 x 1100mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 2000 x 1100mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 2000 x 1100 mm, max. load 9000 kg. Supplied = flat pack. Height = 2000 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 179.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 3500 x 1100mm Max. Load 12000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 3500 x 1100mm Max. Load 12000 kg

Upright frame for Space pallet racking, zinc plated, HxD 3500 x 1100 mm, max. load 12000 kg. Supplied = flat pack. Height = 3500 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 12000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 279.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 1500 x 1100mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 1500 x 1100mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 1500 x 1100 mm, max. load 9000 kg. Supplied = flat pack. Height = 1500 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 149.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 4500 x 1100mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 4500 x 1100mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 4500 x 1100 mm, max. load 9000 kg. Supplied = flat pack. Height = 4500 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 299.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 5000 x 1100mm Max. Load 12000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 5000 x 1100mm Max. Load 12000 kg

Upright frame for Space pallet racking, zinc plated, HxD 5000 x 1100 mm, max. load 12000 kg. Supplied = flat pack. Height = 5000 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 12000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 339.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 3000 x 1100mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 3000 x 1100mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 3000 x 1100 mm, max. load 9000 kg. Supplied = flat pack. Height = 3000 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 219.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 4000 x 800mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 4000 x 800mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 4000 x 800 mm, max. load 9000 kg Supplied = flat pack. Height = 4000 mm. Width = 90 mm. Depth = 800 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 259.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 6500 x 1100mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 6500 x 1100mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 6500 x 1100 mm, max. load 9000 kg. Supplied = flat pack. Height = 6500 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 419.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 6000 x 1100mm Max. Load 9000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 6000 x 1100mm Max. Load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 6000 x 1100 mm, max. load 9000 kg. Supplied = flat pack. Height = 6000 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 9000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 399.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 5500 x 1100mm Max. Load 12000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 5500 x 1100mm Max. Load 12000 kg

Upright frame for Space pallet racking, zinc plated, HxD 5500 x 1100 mm, max. load 12000 kg. Supplied = flat pack. Height = 5500 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 12000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 399.99
1

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 4500 x 1100mm Max. Load 12000 kg

KAISER + KRAFT GMBH Upright Frame for Space Pallet Racking Zinc Plated HxD 4500 x 1100mm Max. Load 12000 kg

Upright frame for Space pallet racking, zinc plated, HxD 4500 x 1100 mm, max. load 12000 kg. Supplied = flat pack. Height = 4500 mm. Width = 90 mm. Depth = 1100 mm. Max. load = 12000 kg. Material = steel. Colour = zinc plated. Product type = pallet racking upright frames. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Robust upright frames for pallet racking units, made of steel. The complete pallet racking consists of just two components, the frames and the beams. All load bearing components are labelled with the max. load. For maximum safety, there is a range of accessories such as an anti-collapse device, end stop, mesh shelves, spacers for double shelving units and more. The Space pallet racking is based on a tried and tested design that prioritises safety and functionality. The pallet racking consists of just two components: the upright frames and the beams. The pallet racking meets all safety requirements and standards in accordance with the EN 15512:2020 standard and the tolerance requirements for fully automated storage. The following applies to pallet racking units and other shelf units used for storage: shelf units for storage intended for alternating loads must be permanently and clearly labelled with the max. load per shelf load and the max. load per beam level. If an impact could present a hazard, impact protection must be provided. Pallet racking units must be anchored if there is a risk of instability. Pallet racking units must be fitted with a protective device that prevents pallets from being pushed through the shelf unit (known as end stops) , unless this is clearly unnecessary.

GBP 339.99
1