11 results (0,15750 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Hitachi Cutting Tools BT50-31.75-260-80+100 Alpha Turbo Mill

Hitachi Cutting Tools BT50-31.75-260-80+100 Alpha Turbo Mill

For Maximum Volume Removal. The ASR Alpha Turbo is the latest addition to the Hitachi mould tool range, it is able to achieve extraordinary feeds and metal removal rates in roughing applications, on new and old machines. 2 to 5 times increased efficiency compared to conventional radius cutters. 4 to 5 times increased efficiency in deep milling with an overhang of 3D or more, and 2 to 3 times for shallow milling at 3D or less. This enables faster production resulting in quicker turnaround of components.The cutters low cut structure enables increases in feed per tooth of up to 5 times. In cutting of steel a feed per tooth of 0.6 to 3.5mm is achievable and already being successfully used. Feed per tooth in cast iron is 0.8 to 4.0mm. This application gave a metal removal rate of 633cm3 ASR 63 with an overhang of 480mm (7.6xD), 1.2mm axial doc, 44mm radial doc with a feed rate of 12mtr per minute. Only 834rpm were needed, material spec was P20 (1.2311) Tool steel Hrc32. In other applications 1000cm3 removal rates were achieved with a larger diameter cutter. The Alpha Turbo is capable of cutting 60 to 80 kg of steel, which is equivalent weight of an adult, within 10 minutes.

GBP 0.00
1

Hitachi Cutting Tools ASRS-4032 Alpha Turbo Short End Mill

Hitachi Cutting Tools ASRS-4032 Alpha Turbo Short End Mill

For Maximum Volume Removal. The ASR Alpha Turbo is the latest addition to the Hitachi mould tool range, it is able to achieve extraordinary feeds and metal removal rates in roughing applications, on new and old machines. 2 to 5 times increased efficiency compared to conventional radius cutters. 4 to 5 times increased efficiency in deep milling with an overhang of 3D or more, and 2 to 3 times for shallow milling at 3D or less. This enables faster production resulting in quicker turnaround of components. The cutters low cut structure enables increases in feed per tooth of up to 5 times. In cutting of steel a feed per tooth of 0.6 to 3.5mm is achievable and already being successfully used. Feed per tooth in cast iron is 0.8 to 4.0mm. This application gave a metal removal rate of 633cm3 ASR 63 with an overhang of 480mm (7.6xD), 1.2mm axial doc, 44mm radial doc with a feed rate of 12mtr per minute. Only 834rpm were needed, material spec was P20 (1.2311) Tool steel Hrc32. In other applications 1000cm3 removal rates were achieved with a larger diameter cutter. The Alpha Turbo is capable of cutting 60 to 80 kg of steel, which is equivalent weight of an adult, within 10 minutes.

GBP 0.00
1

Hitachi Cutting Tools BT50-31.75-180-80+100 Alpha Turbo Mill

Hitachi Cutting Tools BT50-31.75-180-80+100 Alpha Turbo Mill

For Maximum Volume Removal. The ASR Alpha Turbo is the latest addition to the Hitachi mould tool range, it is able to achieve extraordinary feeds and metal removal rates in roughing applications, on new and old machines. 2 to 5 times increased efficiency compared to conventional radius cutters. 4 to 5 times increased efficiency in deep milling with an overhang of 3D or more, and 2 to 3 times for shallow milling at 3D or less. This enables faster production resulting in quicker turnaround of components.The cutters low cut structure enables increases in feed per tooth of up to 5 times. In cutting of steel a feed per tooth of 0.6 to 3.5mm is achievable and already being successfully used. Feed per tooth in cast iron is 0.8 to 4.0mm. This application gave a metal removal rate of 633cm3 ASR 63 with an overhang of 480mm (7.6xD), 1.2mm axial doc, 44mm radial doc with a feed rate of 12mtr per minute. Only 834rpm were needed, material spec was P20 (1.2311) Tool steel Hrc32. In other applications 1000cm3 removal rates were achieved with a larger diameter cutter. The Alpha Turbo is capable of cutting 60 to 80 kg of steel, which is equivalent weight of an adult, within 10 minutes.

GBP 0.00
1

Hitachi Cutting Tools BT50-31.75-330-80+100 Alpha Turbo Mill

Hitachi Cutting Tools BT50-31.75-330-80+100 Alpha Turbo Mill

For Maximum Volume Removal. The ASR Alpha Turbo is the latest addition to the Hitachi mould tool range, it is able to achieve extraordinary feeds and metal removal rates in roughing applications, on new and old machines. 2 to 5 times increased efficiency compared to conventional radius cutters. 4 to 5 times increased efficiency in deep milling with an overhang of 3D or more, and 2 to 3 times for shallow milling at 3D or less. This enables faster production resulting in quicker turnaround of components.The cutters low cut structure enables increases in feed per tooth of up to 5 times. In cutting of steel a feed per tooth of 0.6 to 3.5mm is achievable and already being successfully used. Feed per tooth in cast iron is 0.8 to 4.0mm. This application gave a metal removal rate of 633cm3 ASR 63 with an overhang of 480mm (7.6xD), 1.2mm axial doc, 44mm radial doc with a feed rate of 12mtr per minute. Only 834rpm were needed, material spec was P20 (1.2311) Tool steel Hrc32. In other applications 1000cm3 removal rates were achieved with a larger diameter cutter. The Alpha Turbo is capable of cutting 60 to 80 kg of steel, which is equivalent weight of an adult, within 10 minutes.

GBP 0.00
1

Hitachi Cutting Tools ASF-5080RM 80mm Alpha Super Face Mill

Hitachi Cutting Tools ASF-5080RM 80mm Alpha Super Face Mill

The Alpha Turbo Face mill achieves a higher level of performance, that has never been reached before.1. Unique R shaped cutting edge Very stable performance in interrupted cutting Economical 4 edged insert Large depth of cut up to 3mm2. Large pockets that assist chip flow. Superior chip evacuation for face milling that creates large chips.3. Extraordinary feed rates. Steel 0.2 to 3.5mm per tooth cast iron 0.8 to 4.0mm per tooth4. It is possible to improve roughing efficiency by 2 to 5 times compared with convential type face mills. 1000cm3 to 2000cm3 metal removal rates can be achieved with the Alpha Turbo Face mill

GBP 0.00
1

Hitachi Cutting Tools ASF-5100RM 100MM Alpha Super Face Mill

Hitachi Cutting Tools ASF-5100RM 100MM Alpha Super Face Mill

The Alpha Turbo Face mill achieves a higher level of performance, that has never been reached before.1. Unique R shaped cutting edge Very stable performance in interrupted cutting Economical 4 edged insert Large depth of cut up to 3mm2. Large pockets that assist chip flow. Superior chip evacuation for face milling that creates large chips.3. Extraordinary feed rates. Steel 0.2 to 3.5mm per tooth cast iron 0.8 to 4.0mm per tooth4. It is possible to improve roughing efficiency by 2 to 5 times compared with convential type face mills. 1000cm3 to 2000cm3 metal removal rates can be achieved with the Alpha Turbo Face mill

GBP 0.00
1

Hitachi Cutting Tools ASF-5063RM 63MM Alpha Super Face Mill

Hitachi Cutting Tools ASF-5063RM 63MM Alpha Super Face Mill

The Alpha Turbo Face mill achieves a higher level of performance, that has never been reached before.1. Unique R shaped cutting edge Very stable performance in interrupted cutting Economical 4 edged insert Large depth of cut up to 3mm2. Large pockets that assist chip flow. Superior chip evacuation for face milling that creates large chips.3. Extraordinary feed rates. Steel 0.2 to 3.5mm per tooth cast iron 0.8 to 4.0mm per tooth4. It is possible to improve roughing efficiency by 2 to 5 times compared with convential type face mills. 1000cm3 to 2000cm3 metal removal rates can be achieved with the Alpha Turbo Face mill

GBP 0.00
1

Hitachi Cutting Tools ASF-5250RM 250mm Alpha Super Face Mill

Hitachi Cutting Tools ASF-5250RM 250mm Alpha Super Face Mill

The Alpha Turbo Face mill achieves a higher level of performance, that has never been reached before.1. Unique R shaped cutting edge Very stable performance in interrupted cutting Economical 4 edged insert Large depth of cut up to 3mm2. Large pockets that assist chip flow. Superior chip evacuation for face milling that creates large chips.3. Extraordinary feed rates. Steel 0.2 to 3.5mm per tooth cast iron 0.8 to 4.0mm per tooth4. It is possible to improve roughing efficiency by 2 to 5 times compared with convential type face mills. 1000cm3 to 2000cm3 metal removal rates can be achieved with the Alpha Turbo Face mill

GBP 0.00
1

Hitachi Cutting Tools ASF-5200RM 200mm Alpha Super Face Mill

Hitachi Cutting Tools ASF-5200RM 200mm Alpha Super Face Mill

The Alpha Turbo Face mill achieves a higher level of performance, that has never been reached before.1. Unique R shaped cutting edge Very stable performance in interrupted cutting Economical 4 edged insert Large depth of cut up to 3mm2. Large pockets that assist chip flow. Superior chip evacuation for face milling that creates large chips.3. Extraordinary feed rates. Steel 0.2 to 3.5mm per tooth cast iron 0.8 to 4.0mm per tooth4. It is possible to improve roughing efficiency by 2 to 5 times compared with convential type face mills. 1000cm3 to 2000cm3 metal removal rates can be achieved with the Alpha Turbo Face mill

GBP 0.00
1

Hitachi Cutting Tools ASF-5125RM 125mm Alpha Super Face Mill

Hitachi Cutting Tools ASF-5125RM 125mm Alpha Super Face Mill

The Alpha Turbo Face mill achieves a higher level of performance, that has never been reached before.1. Unique R shaped cutting edge Very stable performance in interrupted cutting Economical 4 edged insert Large depth of cut up to 3mm2. Large pockets that assist chip flow. Superior chip evacuation for face milling that creates large chips.3. Extraordinary feed rates. Steel 0.2 to 3.5mm per tooth cast iron 0.8 to 4.0mm per tooth4. It is possible to improve roughing efficiency by 2 to 5 times compared with convential type face mills. 1000cm3 to 2000cm3 metal removal rates can be achieved with the Alpha Turbo Face mill

GBP 0.00
1

Hitachi Cutting Tools ASF-5160RM 160mm Alpha Super Face Mill

Hitachi Cutting Tools ASF-5160RM 160mm Alpha Super Face Mill

The Alpha Turbo Face mill achieves a higher level of performance, that has never been reached before.1. Unique R shaped cutting edge Very stable performance in interrupted cutting Economical 4 edged insert Large depth of cut up to 3mm2. Large pockets that assist chip flow. Superior chip evacuation for face milling that creates large chips.3. Extraordinary feed rates. Steel 0.2 to 3.5mm per tooth cast iron 0.8 to 4.0mm per tooth4. It is possible to improve roughing efficiency by 2 to 5 times compared with convential type face mills. 1000cm3 to 2000cm3 metal removal rates can be achieved with the Alpha Turbo Face mill

GBP 0.00
1