Promydea.it | Web Agency Sicilia

Elmdene BATT-BOX-3802V Enclosure For Up To 2 x 38Ah Batteries For Use With 2405STE PSU - Complete With Connection Lead

Elmdene BATT-BOX-3802V Enclosure For Up To 2 x 38Ah Batteries For Use With 2405STE PSU - Complete With Connection LeadThe BATT-BOX-3802V is an external battery box designed for use with the 2405STE power supply.Key FeaturesMaximum battery size 2 x 38AhDimensions H 420 X W 420 X D 180 mmComes with connection leadPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 166.02

1

Elmdene LSC-SPC LSCLST - Pack of 10

Elmdene LSC-SPC LSCLST - Pack of 10The LSC-SPC Spacer is designed for use with EN3-LSC-BN-GN Contacts.Spacers help in aligning up the magnet to reed contact on doors that are off set or need a small amount of levelling up. The spacers can be used on both the magnet and or the door contact.Key FeaturesGrade 3

GBP 14.78

1

Elmdene POE-ULTRAPOD-MOD PoE Ultra-Pod Module DIN Rail Mountable Unboxed

Elmdene POE-ULTRAPOD-MOD PoE Ultra-Pod Module DIN Rail Mountable UnboxedThe Elmdene PoE UltraPod is a unique PoE powered device that can charge up to a 12V 17Ah battery whilst continuing to provide a 13.8V dc output of up to 3A.If the PoE power being provided to the input fails the battery seamlessly takes over continuing to provide the 13.8V dc voltage to the device allowing data to continue to flow.Available as a DIN rail mountable module or a boxed unit. It can be used in a variety of PoE applications such as CCTV or Access control.Installer friendly RJ45 connections are provided to off er a simple plug and play solution without the requirement of terminating Cat5 connections.Key FeaturesProvides up to 3A to the device with an additional 0.5A available for battery charging PoE requiredOffers battery back-up on loss of input PoE powerDIN rail or screw mountable moduleBoxed unit has space for 17Ah batteryBoxed unit has fixing points for commonly used access control boardsProvides remote fault monitoring outputsData pass through for IP connections 10100Mbps

GBP 113.45

1

Elmdene 24Vdc 2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah Batteries

Elmdene 24Vdc 2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah BatteriesThe STX2402 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 2.0 Amps continuous into the load in addition to providing up to 700 mA for charging the standby batteries up to 17 Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition. Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 2.0A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 7AhC Box Power Supply - 275h x 330w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 147.38

1

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2 x 17Ah Batteries

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2 x 17Ah BatteriesThe STX2405 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 5 Amps continuous into the load in addition to providing up to 850mA for charging the standby batteries up to 17Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation. Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 5A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 17AhE Box Power Supply 420h x 400w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 188.21

1

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2x 7Ah Batteries

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2x 7Ah Batteries -STX2405-CThe STX2405 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 5 Amps continuous into the load in addition to providing up to 850mA for charging the standby batteries up to 17Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation. Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 5A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 7AhC Box Power Supply - 275h x 330w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 167.24

1

Elmdene 24Vdc 1.8A 0.7A Switch Mode PSU EN54 Approved 2 x 17Ah Batteries

Elmdene 24Vdc 1.8A 0.7A Switch Mode PSU EN54 Approved 2 x 17Ah BatteriesThe STX2402 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 2.0 Amps continuous into the load in addition to providing up to 700 mA for charging the standby batteries up to 17 Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition. Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 2.0A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 17AhE Box Power Supply - 420h x 400w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 164.36

1

Elmdene STX2401-C 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah Batteries

Elmdene STX2401-C 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah BatteriesThe STX2401 is an EN54-41997 A1 A2 approved power supply ideal for use in Fire Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 1.2 Amps continuous current into the load in addition to providing up to 300mA for charging the standby batteries up to 7Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby the batteries are charged for 4 hours in every 24 hour period while still being continuously monitored. This reduces wasted energy in charging already fully charged batteries and extends their working life. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 A2.Up to 1.2A current to load at 27.6V dc nominal regulated output.Charging capability to support 1.2 to 7Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection or circuitimpedance Ri in excess of 500mW caused by connector or wiring problemcorrosion within 4 hours.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 7AhC Box Power Supply - 275h x 330w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 136.90

1

Elmdene 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 1.2Ah Batteries

Elmdene 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 1.2Ah BatteriesThe STX2401 is an EN54-41997 A1 A2 approved power supply ideal for use in Fire Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 1.2 Amps continuous current into the load in addition to providing up to 300mA for charging the standby batteries up to 7Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby the batteries are charged for 4 hours in every 24 hour period while still being continuously monitored. This reduces wasted energy in charging already fully charged batteries and extends their working life. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 A2.Up to 1.2A current to load at 27.6V dc nominal regulated output.Charging capability to support 1.2 to 7Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection or circuitimpedance Ri in excess of 500mW caused by connector or wiring problemcorrosion within 4 hours.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 1.2AhT Box Power Supply - 300h x 240w x 63d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 115.54

1

Elmdene LPS-ENC-T Li-Power Enclosure with Tamper

Elmdene LPS-ENC-T Li-Power Enclosure with TamperLi-Power power supplies have been designed to house andpower common alarm signalling communicators whilst accommodating and chargingin-built Lithium battery packs. Offered in a low-profile sleek enclosure itprovides a compact and flexible solution for intruder installations at bothGrade 2 and Grade 3 requirements EN50131-62017 and PD6662.Key FeaturesExtended life span up to 3 times more than a standard lead acidbattery50 reduction in wall footprint requiredUp to 5 times greater power cycling performanceIncorporates additional battery safety features

GBP 41.66

1

Elmdene 24Vdc 8A 1.6A Switch Mode PSU EN54 Approved 2 x 38Ah Batteries

Elmdene 24Vdc 8A 1.6A Switch Mode PSU EN54 Approved 2 x 38Ah BatteriesThe STX2410 is an EN54-4 approved power supply ideal for use in Fire control Systems. Its regulated 27.6V dc output will supply a total of 10 Amps continuous into the load whilst also enabling battery charging. 7.2 Amps Load with 65Ah batteries 10 Amps with 18Ah batteries 8A with 38Ah Batteries.The power supply output features electronic short circuit protection under both mains and standby battery operation. Maximum battery life is assured through continuous active battery monitoring and the use of a three stage charger comprising bulk absorb and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 2 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the battery. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 10 A current to load at 27.6V dc nominal regulated output.Charging capability to support 18 38 or 65Ah batteries with intelligent load enhancement.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls to 21 V.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present.RS232 serial interface for fault reporting and diagnostics interface to OEM equipment.Suitable to fit batteries up to 2 x 38AhH Box Power Supply - 420h x 420w x 180dHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 377.77

1

Elmdene INT400 EN50131-4 Security Grade 3 Dual Internal Live Sounder

Elmdene INT400 EN50131-4 Security Grade 3 Dual Internal Live SounderThe INT400 sounder is used for notification of an alarm condition as generated within an intruder hold-up or other alarm system. In response to commands from the alarm system control panel the INT400 will emit a high intensity sound.The sounder will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT400 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 110db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 18.60

1

Elmdene INT500 EN50131-4 Security Grade 3 Dual Internal Live Sounder with Strobe

Elmdene INT500 EN50131-4 Security Grade 3 Dual Internal Live Sounder with StrobeThe INT500 sounder is used for notification of an alarm condition as generated within an intruder hold-up or other alarm system. In response to commands from the alarm system control panel the INT500 will emit a high intensity sound andor operate a visual flash.It will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT500 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 108db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 23.58

1

Elmdene INT600 EN50131-4 Security Grade 3 Dual Internal Live Sounder

Elmdene INT600 EN50131-4 Security Grade 3 Dual Internal Live SounderThe INT600 sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT600 will emit a high intensity sound for alarm and an adjustable low level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT600 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 108db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate 160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 21.85

1

Elmdene 4B-1000 Flush Pencil Contact - Grade 2 Plastic Potted With 10M Cable Tail - Pack of 10

Elmdene 4B-1000 Flush Pencil Contact - Grade 2 Plastic Potted With 10M Cable Tail - Pack of 10The 4B-1000 is part of Elmdenes extensive range of magnetic contacts. It is a flush mounted pencil type with potted cable standard 10m length. It is ideal for use in both domestic and commercial installations in both single and multiple door configurations.Constructed from plastic with a brass capped flange the 4B-1000 has an operating gap of 10mm.The 4B range is designed to meet the requirements of EN50131-2-62008 Grade 2 and Environmental Class III. Like all Elmdene magnetic contacts the 4B is constructed from high quality materials and is easy to install set up and commission with any intruder panel.Key FeaturesPlastic Brass constructionPencil Style 7.5mmSleek and symmetrical designPush fit installationEnvironmental Class IIIPack of 10

GBP 97.92

1

Elmdene INT400S EN50131-4 Security Grade 2 Internal Live Sounder

Elmdene INT400S EN50131-4 Security Grade 2 Internal Live SounderThe INT400S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT400S will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT400S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesInternal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 22.49

1

Elmdene INT500S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT500S EN50131-4 Security Grade 2 Dual Internal Live SounderThe INT500S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT500S will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT500S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 30.64

1

Elmdene G2405BM-H 24V d.c. Switch Mode PSU 27.6V 5Amp To Load amp 0.5A Battery Charging

Elmdene G2405BM-H 24V d.c. Switch Mode PSU 27.6V 5Amp To Load 0.5A Battery ChargingThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general purpose applications. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Key FeaturesBattery MonitoringMulti LED status indicationFit up to 2x38Ah batteriesH Box 420h x 420w x 180dHinge lid

GBP 212.34

1

Elmdene STV2405-H 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery Charging

Elmdene STV2405-H 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery charge up to 2x38Ah batteriesH Box 420h x 420w x 180dHinge lid

GBP 281.09

1

Elmdene INT600S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT600S EN50131-4 Security Grade 2 Dual Internal Live SounderThe INT600S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT600 will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT600S is classified as an internal remote powered sounder and is powered via an external power source.The INT600S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 25.43

1

Elmdene STV2401-C 24V d.c. PSU 27.6V 1.2Amp To Load 0.3A Battery Charging

Elmdene STV2401-C 24V d.c. PSU 27.6V 1.2Amp To Load 0.3A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x1.2Ah batteriesC Box

GBP 137.36

1

Elmdene STV2402-H 24V d.c. PSU 27.6V 2 Amp To Load 0.8A Battery Charging

Elmdene STV2402-H 24V d.c. PSU 27.6V 2 Amp To Load 0.8A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x38Ah batteriesH Box 420h x 420w x 180dHinge lid

GBP 232.69

1

Elmdene STV2405-E 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery Charging

Elmdene STV2405-E 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x17Ah batteriesE Box 420h x 400w x 80dHinge lid

GBP 259.36

1

Elmdene STV2402-C 24V d.c. PSU 27.6V 2 Amp To Load 0.3A Battery Charging

Elmdene STV2402-C 24V d.c. PSU 27.6V 2 Amp To Load 0.3A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x7Ah batteriesC Box 275h x 330w x 80dHinge lid

GBP 184.55

1

Elmdene STV2402-E 24V d.c. PSU 27.6V 1.8 Amp To Load 0.7A Battery Charging

Elmdene STV2402-E 24V d.c. PSU 27.6V 1.8 Amp To Load 0.7A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x17Ah batteriesE Box 420h x 400w x 80dHinge lid

GBP 209.48

1

Realizziamo gli obiettivi di business dei nostri clienti: dicci cosa ti serve, lo realizzeremo per te.

Brand

Merchant

Price (EUR)