23 resultater (0,16704 sekunder)

Vis alle filtre

Merke

Farge

Butikk

Pris (EUR)

Nullstill filter

Produkter
Fra
Butikker

Tilta Cage for Sony A6-series ES-T27A - Foto Videotilbehoer

Tilta Cage for Sony A6-series ES-T27A - Foto Videotilbehoer

This versatile camera cage is designed for the Sony a6 series of cameras (a6000, a6300, a6500). It provides a high quality aluminum, CNC-milled protective armor for your camera that has several ¼”-20 and ?”-16 mounting points for attaching accessories. It’s designed to fit around the camera’s hot shoe mount as well as the battery and side input/output compartments. A detachable top handle is included and features a cold-shoe mounting point (an additional cold shoe mount is on the top of the cage itself). This handle easily slides on and off of a small NATO rail that’s attached to the top of the cage. On the bottom of the cage is a fan system with an on/off switch to help cool your camera if needed. Underneath the cooling system is a quick release plate that mounts to a 15mm LWS baseplate. This baseplate allows you to attach various accessories via 15mm rods and can mount to a Tilta Standard Lightweight Dovetail Plate to allow you to easily slide on and off of an operating setup. The baseplate also has a lens adapter support bracket built in to allow a way to mount various lens adapters (support screws for Metabones EF and PL mount adapters are included). An optional right-side wooden handle can be added to your order. This handle is beautifully hand-carved from solid wood and features a very ergonomic design. It includes a recording run/stop button built in as well as a R/S cable of your choice. The wooden handle is attached via an Arri Standard Rosette connection on the right side of the camera.

NOK 7037.00
1

Tilta Universal handgrip - Foto Videotilbehoer

Tilta Universal handgrip - Foto Videotilbehoer

The Tilta Universal Handgrip is a flexible handgrip system that attaches to either 15 mm lightweight or 19mm studio support rods. It consists of a rod bridge and two handgrips. Each handgrip consists of one 90° bend, a short extension, and a rubber hand grip. Each component of the handgrip assembly can be removed, and you can configure the system to suit your needs. The rod bridge features a single knob that tightens/loosens the rod clamps so it is quick to mount or remove. The assembled system has six points of adjustment, three for each hand, so you can configure the handgrips so they are the most comfortable for you. The adjustment points feature Arri compatible rosettes and spring loaded locking levers. The rubber handgrips provide you with a comfortable sure grip. Material of Construction CNC machined aluminum Dimensions Boxed: 14 x 6.75 x 3.25" (35.6 x 17.1 x 8.3 cm) Weight Shipping: 2.8 lb (1.3 kg)

NOK 9473.00
1

Tilta Nucleus-M Wireless Lens Control System Partial Kit III - Foto Videotilbehoer

Tilta Nucleus-M Wireless Lens Control System Partial Kit III - Foto Videotilbehoer

Tilta Nucleus-M Wireless Lens Control System Partial Kit III The Tilta Nucleus-M Wireless Lens Control System Partial Kit III contains the essential elements for pulling focus wirelessly while handholding. The kit includes the Nucleus-M left handgrip controller, one Nucleus-M motor, one removable lens belt, two motor power cables, and a battery charger unit (batteries not included). The handgrip controller provides wireless fingertip lens control while functioning as handgrip support for your camera rig, and the system enables pulling either focus, iris, or zoom on your lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belt to add gears to your lens. This partial kit is a single axis system, but the Nucleus-M left handgrip controller will allow you to control additional motors (not included) so you can control more than one lens ring. The included motor power cables allow you to power a motor from either a D-Tap power source or a second motor via the 7-pin to 7-pin connector. The included power cables allow you to easily add a second motor (not included) to the system. The included rosettes aid in mounting the handgrip controller to your camera or rig with ARRI-style rosettes. The system can wirelessly pull focus from up to 1000' away, and with separately available batteries you can power the hand unit for approximately 10 hours on a single charge.

NOK 12241.00
1

Tilta TA-T18-D-B Camera Cage for Sony A7s III Kit D - Black - Foto Videotilbehoer

Tilta TA-T18-D-B Camera Cage for Sony A7s III Kit D - Black - Foto Videotilbehoer

This camera cage provides protective armor for the Sony a7S III camera. It provides several 1/4"-20 mounting points as well as one cold shoe mounting point. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. A quick release top handle can be attached to the cage to provide for a comfortable camera operating setup. Made specifically for video content creators that demand excellent low light performance, numerous recording options, and long recording times, the new A7sIII builds upon the legacy of the A7sII to deliver a camera that hits all the right spots for a camera of this level. Inspired by the usefulness and ingenuity of this camera's design, Tilta set off to incorporate new design touches that help elevate the camera even further. As part of the Tiltaing series of products, Tilta has put together a versatile, yet lightweight camera cage that is just the beginning for building a camera rig for professional video. The new camera cage is designed to augment and protect the a7sIII, as well as add expansion options like our new rotating top handle, rotating side handles, ARRI standard rosette mounts, and much more.

NOK 5902.00
1

Tilta Quick Release Baseplate for Canon C500 MkII/C300 MkIII - Foto Videotilbehoer

Tilta Quick Release Baseplate for Canon C500 MkII/C300 MkIII - Foto Videotilbehoer

The Quick Release Baseplate for Canon C500 Mk II/C300 Mk III connects to your camera via 1/4?-20 and 3/8?-16 tie down screws and features a non-slip, cushioned shoulder pad designed to be comfortable and secure. The dual rosettes on each side of the baseplate allows users to quickly mount extension arms for better handheld support while the lens adapter support allows you to attach various lens mount adapters via a 1/4?-20 screw. Front and back 15mm LWS rod supports allows you to easily mount accessories both in front of and behind the shoulder pad. The baseplates VCT locking extension and locking toggle allows you to choose between mounting the baseplate to either a standard VCT plate or a Tilta standard dovetail plate.

NOK 8076.00
1

Tilta - ing Sony A7s III Kit D-Tactical Gray - Foto Videotilbehoer

Tilta - ing Sony A7s III Kit D-Tactical Gray - Foto Videotilbehoer

Made specifically for video content creators that demand excellent low light performance, numerous recording options, and long recording times, the new A7sIII builds upon the legacy of the A7sII to deliver a camera that hits all the right spots for a camera of this level. Inspired by the usefulness and ingenuity of this camera?s design, Tilta set off to incorporate new design touches that help elevate the camera even further. As part of the Tiltaing series of products, Tilta has put together a versatile, yet lightweight camera cage that is just the beginning for building a camera rig for professional video. The new camera cage is designed to augment and protect the a7sIII, as well as add expansion options like our new rotating top handle, rotating side handles, ARRI standard rosette mounts, and much more.

NOK 5450.00
1

Tilta Full Camera Cage f GH5 Panasonic Professional Module - Foto Videotilbehoer

Tilta Full Camera Cage f GH5 Panasonic Professional Module - Foto Videotilbehoer

This camera cage provides complete protective armor for the Panasonic GH4, GH5, and GH5S cameras. It provides several 1/4-20 and 3/8-16 mounting points as well as two cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup. This kit of the Panasonic GH Series cage includes: the base Panasonic GH Series cage, quick release top handle, Tilta Hand Strap, Arca and Manfrotto quick release baseplates, a 15mm LWS baseplate for mounting accessories (as well as a single 15mm rod mounting clamp), an HDMI male to HDMI female cable, as well as a clamp to attach the HDMI cable comfortably to the cage and a clamp to attach both the HDMI and Nucleus Nano R/S cable comfortably to the cage.

NOK 9651.00
1

Tilta - ing RED Komodo Kit E- Black - Foto Videotilbehoer

Tilta - ing RED Komodo Kit E- Black - Foto Videotilbehoer

This camera cage provides protective armor for the RED Komodo camera. It provides several 1/4-20 and 3/8-16 mounting points for mounting accessories. It also includes two rosettes on each side as well as a cold shoe mount on top. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. The quick release top handle, adjustable quick release top handle, and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup. This kit of the RED Komodo camera cage will help to fully build out your setup. It includes: the base RED Komodo cage, right side wooden handle, quick release top handle, Arca and Manfrotto quick release baseplates, 15mm LWS baseplate, an Adjustable Cold Shoe Accessory Mounting Bracket, and finally a Dual Canon BP to V Mount Adapter Battery Plate to allow for a longer battery life for your camera.

NOK 11396.00
1

Tilta - ing RED Komodo Kit E-Tactical Gray - Foto Videotilbehoer

Tilta - ing RED Komodo Kit E-Tactical Gray - Foto Videotilbehoer

This camera cage provides protective armor for the RED Komodo camera. It provides several 1/4-20 and 3/8-16 mounting points for mounting accessories. It also includes two rosettes on each side as well as a cold shoe mount on top. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. The quick release top handle, adjustable quick release top handle, and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup. This kit of the RED Komodo camera cage will help to fully build out your setup. It includes: the base RED Komodo cage, right side wooden handle, quick release top handle, Arca and Manfrotto quick release baseplates, 15mm LWS baseplate, an Adjustable Cold Shoe Accessory Mounting Bracket, and finally a Dual Canon BP to V Mount Adapter Battery Plate to allow for a longer battery life for your camera.

NOK 11396.00
1

Tilta Full Camera Cage f Sony A7/A9 Professional Module - Foto Videotilbehoer

Tilta Full Camera Cage f Sony A7/A9 Professional Module - Foto Videotilbehoer

This camera cage provides complete protective armor for the Sony a7, a7 II, a7 III, a7S, a7S II, a7R, a7R II, a7R III, and a9 cameras. It provides several 1/4-20 and 3/8-16 mounting points as well as two cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup. This kit of the Sony a7/a9 cage will help to fully build out your setup. It includes: the base Sony a7/a9 cage, quick release top handle, Tilta Hand Strap, Arca and Manfrotto quick release baseplates, two different bottom plates depending on the camera you are mounting into the cage, a 15mm LWS baseplate for mounting accessories (as well as 15mm rods for the plate), an HDMI to Micro HDMI adapter, a Nucleus Nano run/stop cable for the Sony a7/a9, various clamps to attach the HDMI adapter and R/S cables comfortably to the cage, and finally the Tiltaing Side Power Handle Type III (F570 Battery).

NOK 8840.00
1

Tilta - ing Fujifilm X-T3/XT-4 Kit B Black Version - Foto Videotilbehoer

Tilta - ing Fujifilm X-T3/XT-4 Kit B Black Version - Foto Videotilbehoer

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras. It provides several 1/4-20 mounting points as well as two cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup. This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4), and finally the Tiltaing Side Power Handle with Run/Stop Type I (F570 Battery) along with the compatible Fujifilm X series R/S cable. Compatible with Type II Baseplates and Type I Side Handles.

NOK 6299.00
1

Tilta Quick-release shoulder pad - Foto Videotilbehoer

Tilta Quick-release shoulder pad - Foto Videotilbehoer

The Universal Quick Release Shoulder Pad is fast and convenient. It allows for any camera with either a Tilta standard or Arri standard baseplate to slide and lock in for run-and-gun shoulder mounted set-ups without the need to screw on additional baseplates. It comes with two dovetail-style plates: one that is Tilta standard and one that is Arri standard so depending on your plate system, you can have your normal dovetail attached to your tripod and then quickly and easily slide off of that and onto the shoulder pad?s plate to be ready for handheld in no time. The pad is sturdy and firm yet very comfortable during operation.

NOK 6579.00
1

Tilta Quick-releas handgrips -15mm/15mm - Foto Videotilbehoer

Tilta Quick-releas handgrips -15mm/15mm - Foto Videotilbehoer

This high strength universal hand grip system clamps directly onto the rods of your camera setup, allowing for super fast transitions from shoulder mounted operation to other camera mounts and back again. Simply snap the bridge onto the rods and lock it down via a tightening screw. This system comes in two different designs: one that offers mounting points to 15mm LWS and 15mm studio rod systems and another that offers mounting points to 15mm LWS and 19mm studio rod systems. This snap-on design ensures that you will not have to remove accessories that are already attached to the rods. The rig is extremely stable, solid, and durable. The hand grips have high density foam for comfort, support, and stability which can also be rotated 360 degrees via stainless steel Arri Standard Rosettes. Furthermore, the three-joints design allows for operator flexibility and comfort. The Rosette Extension Handles can be extended to fit your needs. Weight: 2.6 lbs Color: Black Material: Aluminum-alloy, stainless steel Rod System: UH-T04-15S (15mm LWS/15mm studio), UH-T04 (15mm LWS/19mm studio)

NOK 7773.00
1