34 results (0,17006 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Vlieseline sew-in interlining L11 white

Vlieseline sew-in interlining L11 white

Properties Lightweight, soft sew-in nonwovens interlining made from a blend of synthetic fibres. Weight 32 g/m2 Application areas For the fusing of small parts and front parts in blouses and dresses and for handicrafts. Suitable for lightweight fabrics such as crushed and pleated fabrics which are heat sensitive and unable to be ironed. Processing Sew in by hand or using a sewing machine. Quilt spacing 15 cm Advantages Easy to sew in Washable up to 60° Percentage of recycled polyester Soft, comfortable texture

GBP 4.75
1

Vlieseline fusible interlining H609white

Vlieseline fusible interlining H609white

Properties Lightweight, soft and bi-elastic fusible weft interlining made from synthetic fibres; extremely elastic both in warp and weft direction. Weight 41 g/m2 Application areas For the fusing of small parts and front parts in clothing made from high-quality and highly elastic outer fabrics such as jersey. Suitable for light- to mediumweight elastic fabrics. Processing Lay the interlining with the coated side facing the reverse side of the fabric. Iron on dry for around 8 seconds. Press the iron down firmly over each section 5–6 times. (Iron setting: silk/wool). After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Washable up to 60° Easy to work with Retains its shape

GBP 9.50
1

Vlieseline fusible interlining H609black

Vlieseline fusible interlining H609black

Properties Lightweight, soft and bi-elastic fusible weft interlining made from synthetic fibres; extremely elastic both in warp and weft direction. Weight 41 g/m2 Application areas For the fusing of small parts and front parts in clothing made from high-quality and highly elastic outer fabrics such as jersey. Suitable for light- to mediumweight elastic fabrics. Processing Lay the interlining with the coated side facing the reverse side of the fabric. Iron on dry for around 8 seconds. Press the iron down firmly over each section 5–6 times. (Iron setting: silk/wool). After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Washable up to 60° Easy to work with Retains its shape

GBP 9.50
1

Vlieseline batting 280 white

Vlieseline batting 280 white

Properties Light-weight, lofty sewable batting made of synthetic fibres. Weight 80 g/m2 Application areas For duvets, quilts and tapestries as well as light clothing, such as jackets and coats. Suitable for all fabrics. Processing 1. Tack the reverse side of the fabric to the batting and sew in by hand or using a sewing machine. 2. Simply lay underneath and sew together. Quilting spacing: 15–20 cm. Advantages Very puffy, lightweight and soft polyester batting Good thermal insulation Breathable Easy to work with

GBP 8.75
1

Vlieseline batting 281 white

Vlieseline batting 281 white

Properties Light-weight, lofty sewable batting made of synthetic fibres. Weight 80 g/m2 Application areas For duvets, quilts and tapestries as well as light clothing, such as jackets and coats. Suitable for all fabrics. Processing 1. Tack the reverse side of the fabric to the batting and sew in by hand or using a sewing machine. 2. Simply lay underneath and sew together. Quilting spacing: 15–20 cm. Quilt spacing: 15 cm Advantages Very puffy, lightweight and soft polyester batting Good thermal insulation Breathable Easy to work with

GBP 15.00
1

Vlieseline vliesofix bondaweb 719

Vlieseline vliesofix bondaweb 719

FeaturesAdhesive mass on carrier paper for iron-on application. Weight 28g/m2 + paper, width 90cm.Area of applicationTo connect/attach layers of fabric together, for example for applications, hobby work or repairs. Suitable for all fabrics, paper, wood, and at low temperature also for leather.Treatment1. Trace or draw the motif mirrored on the paper side of Vliesofix®, and roughly cut it out.2. Place Vliesofix® with the rough side on the back of the fabric, and iron it on for about 5-10 seconds with medium to high heat using an iron.3. Cut the motif precisely and remove the backing paper.4. Then place it with the coated side down on the chosen area on another fabric. Cover it with a damp cloth and iron step by step for 10 seconds.5. Sew around the application with zigzag stitches, and if necessary, use embroidery stabilizer underneath.Advantages• Adheres on both sides• Precise applications• Does not shift during sewing with zigzag stitches

GBP 9.25
1

Vlieseline fusible interlining H250white

Vlieseline fusible interlining H250white

Properties Mediumweight, stable fusible nonwoven interlining made from a blend of synthetic fibres. Fully coated surface for firmer handle. Weight 62g/m2 Application areas For the fusing of shaped waistbands and belts and for various handicrafts. Suitable for medium- to heavyweight fabrics for dresses. Processing Lay the interlining with the coated side facing the reverse side of the fabric. Iron on dry for around 8 seconds. Press the iron down firmly over each section 5–6 times. (Iron setting: silk/wool). After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Washable up to 60° Easy to work with Retains its shape

GBP 6.00
1

Vlieseline fusible interlining H180black

Vlieseline fusible interlining H180black

Properties Lightweight, soft and fine fusible nonwoven interlining made from synthetic fibres. Weight 37 g/m2 Application areas For the fusing of small parts on blouses and shirts and if front parts. Suitable for lightweight fabrics. Processing Lay the interlining with the coated side facing the reverse side of the fabric. Iron on for around 12 seconds with a damp cloth. Press the iron down firmly over each section 5–6 times. (Iron setting: silk/wool). After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Outstanding bond on difficult, fashion fabrics such as viscose, acetate and cupro Easy to iron-on Soft, comfortable texture

GBP 6.75
1

Vlieseline fusible interlining H250black

Vlieseline fusible interlining H250black

Properties Mediumweight, stable fusible nonwoven interlining made from a blend of synthetic fibres. Fully coated surface for firmer handle. Weight 62g/m2 Application areas For the fusing of shaped waistbands and belts and for various handicrafts. Suitable for medium- to heavyweight fabrics for dresses. Processing Lay the interlining with the coated side facing the reverse side of the fabric. Iron on dry for around 8 seconds. Press the iron down firmly over each section 5–6 times. (Iron setting: silk/wool). After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Washable up to 60° Easy to work with Retains its shape

GBP 6.00
1

Vlieseline fusable interlin. H200 black

Vlieseline fusable interlin. H200 black

Properties Lightweight fusible nonwoven interlining made from synthetic fibres. Weight 45 g/m2 Application areas For the fusing of small parts such as collars and cuffs on blouses and shirts. Suitable for lightweight fabrics. Processing Lay the interlining with the coated side facing the reverse side of the fabric. Iron on for around 12 seconds with a damp cloth. Press the iron down firmly over each section 5–6 times. (Iron setting: silk/wool). After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Outstanding bond on difficult, fashion fabrics such as viscose, acetate and cupro Easy to iron-on Soft, comfortable texture

GBP 6.75
1

Vlieseline fusible interlining H180white

Vlieseline fusible interlining H180white

Properties Lightweight, soft and fine fusible nonwoven interlining made from synthetic fibres. Weight 37 g/m2 Application areas For the fusing of small parts on blouses and shirts and if front parts. Suitable for lightweight fabrics. Processing Lay the interlining with the coated side facing the reverse side of the fabric. Iron on for around 12 seconds with a damp cloth. Press the iron down firmly over each section 5–6 times. (Iron setting: silk/wool). After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Outstanding bond on difficult, fashion fabrics such as viscose, acetate and cupro Easy to iron-on Soft, comfortable texture

GBP 6.75
1

Vlieseline fusable interlin. H200 white

Vlieseline fusable interlin. H200 white

Properties Lightweight fusible nonwoven interlining made from synthetic fibres. Weight 45 g/m2 Application areas For the fusing of small parts such as collars and cuffs on blouses and shirts. Suitable for lightweight fabrics. Processing Lay the interlining with the coated side facing the reverse side of the fabric. Iron on for around 12 seconds with a damp cloth. Press the iron down firmly over each section 5–6 times. (Iron setting: silk/wool). After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Outstanding bond on difficult, fashion fabrics such as viscose, acetate and cupro Easy to iron-on Soft, comfortable texture

GBP 6.75
1

Vlieseline Framilastic 9mm transp. 150m

Vlieseline Framilastic 9mm transp. 150m

Properties Sewable tape of a very high and permanent elasticity. Weight 160 g/m2 Application areas For the securing of elastic seams, e.g. shoulder seams of ladies' wear, lingerie, swimwear and sportswear and also for creative accents such as gathers, ripples and ruffles. Processing Cut the Framilastic shorter than the section to be sewn – depending on how much of a gather you wish to create. At the start of your gather, sew on approx. 1 cm of tape smoothly (with a zigzag stitch, and please don’t forget to fix the underlap). Then stretch the tape the desired length and sew it on while under tension. At the end, you must again fix the underlap. When working with Framalistic, the transparent tape should always be sewn in the centre. This ensures it is even and sits evenly. Important: When washing, do not use softener. Advantages High tear resistance Resistant to chlorine Friendly on the skin

GBP 98.00
1

Vlieseline batting soya mix 278

Vlieseline batting soya mix 278

FeaturesMedium-weight, very soft volume fleece made of soya and cotton for sewing. Weighs 135g/m2, width 150cm.ApplicationFor quilted blankets, quilts, wall hangings, and lightweight clothing such as jackets and coats.Suitable for all fabrics.TreatmentSew by hand or machine.1. When sewing through, keep a maximum distance of 20 cm between seams.2. Pre-washing is only necessary if you want to avoid shrinkage later. Do not wring, but press lightly and dry flat.Advantages• Lightweight and soft• Cooling• Soy fibers are antimicrobial

GBP 19.00
1

Vlieseline tape stretchfix 30mm 5m

Vlieseline tape stretchfix 30mm 5m

FeaturesElastic heat-activated adhesive tape on carrier paper. Double-sided adhesive.Weight 20g/m2 + paperWidth 30mm5m per packApplicationsStretchfix is suitable for quick and easy hemming without the use of needle and thread. It is particularly suitable for jersey fabrics. Thanks to its elasticity, the suppleness of the jersey fabric is preserved, and there is no risk of it coming loose, for example, during application.Treatment1. Iron Stretchfix T30 along the edge in 2-3 places for 10-12 seconds without steam, and then iron the seam in the fold in the width of the tape (before removing the paper). This immediately defines the seam width and fold without the need for measuring.2. Allow the paper to cool completely, and then remove it.3. Fold the seam, cover it with a damp cloth, and press it in 2-3 places in steps of about 10-12 seconds. Do not slide.Application adviceTest the product several times before applying it.

GBP 6.75
1

Vlieseline quickscreen square

Vlieseline quickscreen square

FeaturesMedium-weight non-woven interfacing for patchwork made of mixed synthetic fibers with a printed blue pattern at a 90° angle. Fields are 1x1 cm. Without adhesive side. Weighs 50g/m2, width 90cm.ApplicationFor patchwork projects with precise and accurate processing of fabric strips. Suitable for all fabrics.Treatment1. Cut a fabric square and fabric strips in different sizes, as well as a Rasterquick square in the desired size. Place the fabric square centered with the right side up on the unprinted back of the Rasterquick. Place the fabric strip on the square with the right sides of the fabric facing each other, and stitch both fabrics across at the beginning and end of the fabric strip.2. Turn the work over and sew along the fabric square using the printed line (remember seam allowance).3. Turn the work over again and cut fabric strips in the course of the square.4. Work your way through the entire Rasterquick square piece in this way.Advantages• Quick, precise work• Ideal for geometric patterns• Uniform appearance

GBP 7.50
1

Vlieseline Filmoplast H54 white

Vlieseline Filmoplast H54 white

Properties self-adhesive embroidery backing. 25 g/m2 + paper Application areas For mounting and embroidering small parts in an embroidery hoop, for machine embroidery, for framing embroidered pictures and for making collages. Suitable for all fabrics. Processing Mount in an embroidery frame with the masking paper facing up. Carefully score the masking paper with a needle without damaging the nonwoven fabrics. Remove the scored area. Position the fabric, smooth it out and start embroidering. Tear off the Filmoplast H54 from the back. Advantages Perfect for working on pieces that are smaller than the embroidery frame Pucker-free embroidery No slippage

GBP 9.75
1

Vlieseline interlining Decovil I l. beig

Vlieseline interlining Decovil I l. beig

Properties Lighterweight, dimensionally stable and resilient iron-on interlining with a leather-like handle. Weight 240 g/m2 Application areas For creative work such as bags, hats, belts etc. and for interior design. Suitable for cotton, decorative and synthetic fabrics. Processing Lay the interlining with the coated side facing the reverse side of the fabric. Cover with a damp cloth and iron for around 6 seconds, section by section. Do not push the iron. After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Dimensionally stable High resilience Resistant to bending Extremely resistant to tearing Non-fraying Can be punched in several layers if required Very easy to sew in Suitable for stitching and turning

GBP 16.00
1

Vlieseline stickvlies solufleece white

Vlieseline stickvlies solufleece white

FeaturesFine and water-soluble embroidery stabilizer. Weighs 38g/m2, width 90cm.ApplicationFor all types of machine embroidery, new creative techniques, and as an ideal sewing aid for mini-quilting.For all washable and sewable fabrics and textile materials.Treatment1. Place Soluvlies under the fabric and stretch it in an embroidery hoop.2. Embroider the desired design.3. After embroidery, simply wash out the Soluvlies.4. Important: Do not iron or tear off!Advantages• Stabilizer for all types of machine embroidery• You can also draw your embroidery design directly on the stabilizer with a marking pen.• Can be completely washed out - even in cold water• Very good stabilizing processing properties• Wide range of applications, e.g. for free lace embroidery, appliqué and insertion designs• For making collages with pizza and thread techniques

GBP 8.00
1

Vlieseline biastape 12mm graphite 100m

Vlieseline biastape 12mm graphite 100m

Properties Mediumweight, bias-cut fusible tape made from synthetic fibres and with a reinforcement stitch. Weight 54 g/m2 Application areas Securing of bias-cut or round edges. Suitable across a wide range of fabrics. Processing The bias tape is 12 mm wide and has a chain stitch at 4/8 mm from the edge. Iron on the tape in such a way that the 8 mm side meets the fabric edge and is sewn right behind the chain stitch. Slowly and firmly iron on for around 8 seconds per section. Iron dry. Advantages Secures and finishes all round and diagonal edges Versatile in application No stretching of the edges thanks to the chain stitch Flat, soft stitch-and-fold edges

GBP 82.00
1

Vlieseline biastape 12mm white 100m

Vlieseline biastape 12mm white 100m

Properties Mediumweight, bias-cut fusible tape made from synthetic fibres and with a reinforcement stitch. Weight 54 g/m2 Application areas Securing of bias-cut or round edges. Suitable across a wide range of fabrics. Processing The bias tape is 12 mm wide and has a chain stitch at 4/8 mm from the edge. Iron on the tape in such a way that the 8 mm side meets the fabric edge and is sewn right behind the chain stitch. Slowly and firmly iron on for around 8 seconds per section. Iron dry. Advantages Secures and finishes all round and diagonal edges Versatile in application No stretching of the edges thanks to the chain stitch Flat, soft stitch-and-fold edges

GBP 82.00
1

Vlieseline woven interlining G785 black

Vlieseline woven interlining G785 black

Properties Lightweight, very fine fusible woven interlining made from synthetic fibres. Weight 30 g/m2 Application areas For the fusing of small parts in blouses and dresses and front parts of elastic jackets. Suitable for lightweight, transparent and sensitive fabrics. Processing As with all interlinings from Vlieseline, this woven interlining is always cut lengthwise following the direction of the thread. Place the interlining on the reverse side of the fabric with the coated side facing down and initially fix in place at a few points at a low temperature to prevent warping. Then cover with a damp cloth and iron on thoroughly, section by section, for around 8 seconds. Do not push the iron. After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Two-way stretch Excellent bond on difficult fabrics such as viscose, acetate, cupro and coated fabrics Very comfortable to wear Soft, comfortable texture

GBP 9.75
1

Vlieseline woven interlining G785 white

Vlieseline woven interlining G785 white

Properties Lightweight, very fine fusible woven interlining made from synthetic fibres. Weight 30 g/m2 Application areas For the fusing of small parts in blouses and dresses and front parts of elastic jackets. Suitable for lightweight, transparent and sensitive fabrics. Processing As with all interlinings from Vlieseline, this woven interlining is always cut lengthwise following the direction of the thread. Place the interlining on the reverse side of the fabric with the coated side facing down and initially fix in place at a few points at a low temperature to prevent warping. Then cover with a damp cloth and iron on thoroughly, section by section, for around 8 seconds. Do not push the iron. After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise. Advantages Two-way stretch Excellent bond on difficult fabrics such as viscose, acetate, cupro and coated fabrics Very comfortable to wear Soft, comfortable texture

GBP 9.75
1

Vlieseline batting 295 white

Vlieseline batting 295 white

Properties Light-weight, soft and very lofty sewable batting made of synthetic fibres. Weight 96 g/m2 Application areas For patchwork and quilting with particularly voluminous effects, such as bedspreads and tapestries. Suitable for all fabrics. Processing Tack the reverse side of the fabric to the batting and sew in by hand or using a sewing machine. Simply lay underneath and sew together. Quilting spacing: 15–20 cm. Advantages Extraordinarily lightweight combined with maximum volume Especially soft and supple Excellent thermal insulation Breathable

GBP 16.00
1