1.420 results (0,15097 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Ford Puma Bolt in Multipoint Competition Roll Cage

Ford Puma Bolt in Multipoint Competition Roll Cage

This is a Competition level cage suitable for all Motorsport UK Events. WE CAN OFFER THIS CAGE IN A RANGE OF SPECIFICATIONS JPC1.5 – SINGLE DOORBARS – DIAGONAL REAR – HARNESS BAR JPC2 – SINGLE DOORBARS – X REAR – HARNESS BARS JPC3 – DOUBLE DOORBARS – X REAR – HARNESS BARS JPC4 – DOUBLE DOORBARS – X REAR – HARNESS BARS – A PILLAR SUPPORTS These are available powder coated in a range of colors! Fully Motorsport UK compliant! Fitting available!

GBP 1256.86
1

BMW E36 COUPE DIY WELD IN MULTIPOINT CAGE KIT

BMW E36 COUPE DIY WELD IN MULTIPOINT CAGE KIT

Multi point Cage Kit What’s included? Variations are available for all our cages! Main Roll bar A Pillar Bars Front Roof Bar Rear stays Bracing as pictured Rear Subframe tie in Triangulation and K bracing as shown Gusseting for any intersection and Pillar support Mounting plates/boxes as required. Our kits are Designed for easy assembly for anyone with welding and fabrication abilities. The Kits are CNC notched, marked and labelled. This Kit includes positioning markers and an instruction page ON REQUEST which clearly shows the locations for each labelled tube in order make light work of the job!

GBP 1752.97
1

BMW E30 BOLT IN HALF CAGE (Material: Standard CDS)

BMW E30 BOLT IN HALF CAGE (Material: Standard CDS)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one.   These are available powder coated in a range of colours!   Full fitting kit included – mounts are to be welded into place.

GBP 595.36
1

Peugeot 206 Bolt in Half Cage (Material: Standard CDS)

Peugeot 206 Bolt in Half Cage (Material: Standard CDS)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one.   These are available powder coated in a range of colours!   Full fitting kit included – mounts are to be welded into place.

GBP 595.36
1

Zero 360 3.0kg Electric - For Rally Cars

Zero 360 3.0kg Electric - For Rally Cars

Zero 360 FIA Novec 1230 Stored Pressure Electric Novec 1230, Steel Mechanical, Aluminium Electric, 5 Nozzles (3x Engine Bay, 2x Cockpit), 3.0kg Variants 2.25 kg 106-001-005 – For circuit cars. 3.0 kg 106-001-008 – For Rallying. Kit Includes: Cockpit Nozzle – 955-300-003 x 2 Engine Nozzles – 955-300-004 x 3 FIA complaint Bracket and Straps – 920-100-008-FIA x 1 Tubing 8mm Diameter – 951-101-008 x 8m Cross Connector – 952-408-007 x 1 T Connector – 952-408-001 x 1 Bulkhead Connector – 952-408-002 x 1 Waterproof switches – 942-100-004 x 2 Control Box – 941-000-001 x 1 Decal Pack – 990-100-001 x 1 Tube Clips – 951-200-004 (Pack of 10)

GBP 978.00
1

Zero 360 3.0kg Fire Marshal - For Rally Cars

Zero 360 3.0kg Fire Marshal - For Rally Cars

Zero 360 FIA Novec 1230 Fire Marshal Mechanical Novec 1230, Steel Mechanical, Aluminium Electric, 5 Nozzles (3x Engine Bay, 2x Cockpit), 3.0kg Variants 2.25 kg 106-001-004 – For circuit cars. 3.0 kg 106-001-007 – For Rallying. Kit Includes: Cockpit Nozzle – 955-300-003 x 2 Engine Nozzles – 955-300-004 x 3 FIA complaint Bracket and Straps – 920-100-008-FIA Tubing 8mm Diameter – 951-101-008 x 8m Cross Connector – 952-408-007 x 1 T Connector – 952-408-001 x 1 Bulkhead Connector – 952-408-002 x 1 Pull Cables 2.0m – 935-100-001 x 1 Pull Cable 4.0 m – 935-100-002 x 1 Decal Pack – 990-100-001 x 1 Tube Clips – 951-200-004 (Pack of 10)

GBP 582.00
1

Zero 360 2.25kg Electric - For Circuit Cars

Zero 360 2.25kg Electric - For Circuit Cars

Zero 360 FIA Novec 1230 Stored Pressure Electric Novec 1230, Steel Mechanical, Aluminium Electric, 5 Nozzles (3x Engine Bay, 2x Cockpit), 3.0kg Variants 2.25 kg 106-001-005 – For circuit cars. 3.0 kg 106-001-008 – For Rallying. Kit Includes: Cockpit Nozzle – 955-300-003 x 2 Engine Nozzles – 955-300-004 x 3 FIA complaint Bracket and Straps – 920-100-008-FIA x 1 Tubing 8mm Diameter – 951-101-008 x 8m Cross Connector – 952-408-007 x 1 T Connector – 952-408-001 x 1 Bulkhead Connector – 952-408-002 x 1 Waterproof switches – 942-100-004 x 2 Control Box – 941-000-001 x 1 Decal Pack – 990-100-001 x 1 Tube Clips – 951-200-004 (Pack of 10)

GBP 804.00
1

Peugeot 206 Bolt in Dash Dodger (Design Options: JPC2 - Single Doorbars, X Rear)

Peugeot 206 Bolt in Dash Dodger (Design Options: JPC2 - Single Doorbars, X Rear)

This is Track Day Cage not suitable for competition. WE CAN OFFER THIS CAGE IN A RANGE OF SPECIFICATIONS JPC1.5 – SINGLE DOORBARS – DIAGONAL REAR – HARNESS BAR JPC2 – SINGLE DOORBARS – X REAR – HARNESS BARS JPC3 – DOUBLE DOORBARS – X REAR – HARNESS BARS These are available powder coated in a range of colours! Fitting available! The cage will come with full fitting kit to weld in place.

GBP 1058.40
1

MK4 VW Golf Bolt in Half Cage (Material: Standard CDS)

MK4 VW Golf Bolt in Half Cage (Material: Standard CDS)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one.     These are available powder coated in a range of colours!

GBP 595.36
1

Zero 360 3.0kg Remote Charge - CD

Zero 360 3.0kg Remote Charge - CD

Bracket & Straps – Small Remote Charge – 1 x 920-100-007-FIA 8mm Bulkhead Fitting – 1 x 952-408-002 Decal Pack – 1 x 990-100-001 8mm Equal T Connector – 1 x 952-408-001 Tube Clips – Fits all Sizes – 5 x 951-200-002 8mm – Alloy Semi Rigid Tube – per metre – 8 x 951-101-008 Heat Proof Over braid (6-10mm) per metre – 6 x 951-300-001 Zero 360 Double ‘Z’ Nozzle – Straight Inlet – c/w Cartridge – 3 x 955-300-004 Zero 360 Nozzle – Straight Inlet & Locking Nut – 2 x 955-300-003 Power Pack – Current – Binder Socket – 1 x 941-000-004 Plug & Lead – Zero 360 Remote Systems Only – 1 x 943-101-005 Switch – Internal/External – Waterproof – Aluminium Bezel – 2 x 942-100-004 Saddle + Ty-rap for Remote Charge 1 x 901-120-001

GBP 1536.00
1

Triumph 2000 DIY roll cage kit - bolt in fitment

Triumph 2000 DIY roll cage kit - bolt in fitment

THIS IS A JOB FOR COMPETENT FABRICATORS ONLY! FITTING AVAILABLE Whats included? MRB – MAIN ROLL BAR LAB/RAB – LEFT/RIGHT A BARS (LATERAL ROLLBARS) RFB – ROOFBAR RB/LB – RIGHT/LEFT BACKSTAY (REAR LEGS) D1, – DIAGONAL1 (D1 TOP ALLWAYS GOES OVER DRIVERS HEAD) LH/RH – LEFT/RIGHT HARNESS BAR LD/RD – LEFT/RIGHT DOORBAR 8 PAIRS  OF 45MM SADDLE CLAMPS (MALE SADDLE ALWAYS FACES INSIDE THE CAR) MOUNTS AND FOOT PLATES NUTS AND BOLTS NOTE. SOME FETTLING MAY BE REQUIRED & ALL TUBES/ PLATES MUST BE CLEANED AND PREPPED READY FOR WELDING PRIOR TO ASSEMBLY. -This kit is Designed for easy assembly for anyone with welding and fabrication abilities.   -The Kit is CNC notched, marked and labelled.   -Look at the images below for reference as to where the mounts sit, use this to gauge where to remove unused body components from, give your self a good size area to work with, then clean all the paint from the chassis in the areas of mounting, this will save lots of time.   All mounts will have a captive nut which needs to face down in the car   using the images as a reference tack the hoop mounts in place ( you may need to mark and drill holes for the captive nuts to set into)   bolt the matching footplate on top   Position MRB onto the mounts ensuring the positioning markers at the top are facing the back for the backstays and tack the inside of each leg enough to secure the hoop under its own weight but still allow movement.   offer LB/RB up to the hoop and gauge where it will land and mark it   the distance between the 2 backstays at the bottom should be 1160mm centres   mark this and position your rear mounts and feet accordingly (120x60mm 3 mm rectangle plates with 3 holes)   now position LB and RB tacking them in place, check D1 lines up with the markers.   offer LAB or RAB into position to check hoop position looks correct   using the doorbars as a reference mark the landing position of your front feet and tack the mounts in position.   once the front mounts are tacked in you can fit the LAB & RAB tacking the front leg to the foot plate and using the saddle clamps to join to the hoop ( rotate saddle to get best possible fitment )   loosely clamp a pair of saddle clamps to each end of the RFB   lift the bar into place over head so it is as close to the roof structure as possible ( you need clearance to remove and fit)   now fit the doorbars with the saddle clamps on each end   once everything is tacked inside the car, weld everything that is easy access, but not the saddle clamps (you may weld both together so you cannot separate)   make sure the saddles have decent tacks on so they dont break.   once you are happy the cage is secure unbolt it and remove to complete the rest of the welding including the saddle clamps   be mind-full that your cage may contract after welding so recheck the mounts after the cage is welded before welding the mounts in place.   once happy the mounts still line up fully weld them in place

GBP 756.00
1

CAMEL TROPHY LE/EXPEDITION LUGGAGE RACK - LANDROVER DISCOVERY 1 (MODEL: LE RACK (GUTTER MOUNTED))

CAMEL TROPHY LE/EXPEDITION LUGGAGE RACK - LANDROVER DISCOVERY 1 (MODEL: LE RACK (GUTTER MOUNTED))

CAMEL TROPHY LE/EXPEDITION ROOF RACK FOR THE LANDROVER DISCOVERY 1 THIS IS A REPRODUCTION OF THE ORIGIONALS WHICH FEATURES ALL THE LATEST TOOL HOLDERS AND MOUNTS SUCH AS: 2x SAND LADDERS AXE HOLDER SHOVEL HOLDER HANDLE HOLDERS LIGHT BRACKETS SPARE WHEEL MOUNT SIGN MOUNTSYOU HAVE 2 OPTIONS: LE RACK (GUTTER MOUNTED) EXPEDITION RACK (ROOF MOUNTED INTO ADDITIONAL ROLLCAGE AS PER OTIGIONAL)THESE WILL BE FINISHED RAW (UNPAINTED) IN ORDER TO AVOID TRANSPORT DAMAGES DUE TO THEIR SIZE AND WEIGHT.

GBP 2160.00
1

MK3 Vauxhall Corsa Bolt in Dash Dodger (Design Options: JPC2 - Single Doorbars, X Rear)

MK3 Vauxhall Corsa Bolt in Dash Dodger (Design Options: JPC2 - Single Doorbars, X Rear)

This is Track Day Cage not suitable for competition. WE CAN OFFER THIS CAGE IN A RANGE OF SPECIFICATIONS JPC1.5 – SINGLE DOORBARS – DIAGONAL REAR – HARNESS BAR JPC2 – SINGLE DOORBARS – X REAR – HARNESS BARS JPC3 – DOUBLE DOORBARS – X REAR – HARNESS BARS These are available powder coated in a range of colours! Fits Sunroof Model Fitting available! The cage will come with full fitting kit to weld in place.

GBP 1058.40
1

MK3 SEAT LEON 5 DOOR HALF CAGE (Material: Standard CDS)

MK3 SEAT LEON 5 DOOR HALF CAGE (Material: Standard CDS)

This is a track day cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours! The cage comes with all required bolts and mounts to be welded in place.

GBP 595.36
1

CAMEL TROPHY LE/EXPEDITION LUGGAGE RACK - LANDROVER DISCOVERY 1 (MODEL: EXPEDITION RACK (REQUIRES ROLL CAGE))

CAMEL TROPHY LE/EXPEDITION LUGGAGE RACK - LANDROVER DISCOVERY 1 (MODEL: EXPEDITION RACK (REQUIRES ROLL CAGE))

CAMEL TROPHY LE/EXPEDITION ROOF RACK FOR THE LANDROVER DISCOVERY 1 THIS IS A REPRODUCTION OF THE ORIGIONALS WHICH FEATURES ALL THE LATEST TOOL HOLDERS AND MOUNTS SUCH AS: 2x SAND LADDERS AXE HOLDER SHOVEL HOLDER HANDLE HOLDERS LIGHT BRACKETS SPARE WHEEL MOUNT SIGN MOUNTSYOU HAVE 2 OPTIONS: LE RACK (GUTTER MOUNTED) EXPEDITION RACK (ROOF MOUNTED INTO ADDITIONAL ROLLCAGE AS PER OTIGIONAL)THESE WILL BE FINISHED RAW (UNPAINTED) IN ORDER TO AVOID TRANSPORT DAMAGES DUE TO THEIR SIZE AND WEIGHT.

GBP 1920.00
1

SUZUKI JIMNY DIY WELD IN INTERNAL HALF CAGE KIT (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

SUZUKI JIMNY DIY WELD IN INTERNAL HALF CAGE KIT (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Whats included? X Bracing components Main roll bar Left and right back stays Harness bars Mounting boxes/plates This kit is Designed for easy assembly for anyone with welding and fabrication abilities. The Kit is CNC notched, marked and labelled.     Use the images for reference on mount positions, the front mounts push into the corners and you position the hoop on top to suit. Look at the images below for reference as to where the mounts sit, use this to gauge where to clean the paint/sealer from, give your self a good size area to work with, this will save lots of time, then your mounts can be tacked straight down to build up from. once prepped tack your front mounts in place as shown in the attached images, after cleaning all the ends of your tubes offer the hoop into position and tack it in place just to allow some movement of lean angle. Offer your rear legs up to the positioning marks (RB and LB), your D1 should line up to the positioning marks, once in place you can then offer your D2 and D3 to create the X, the trick is to symmetrise the top and bottom and then pull the middles inline with a straight edge angle jig or eye it up with a straight edge to ensure the line is true. so long as the cage looks even/symmetrical thats all okay. once your happy that everything lines up in the correct place in the car you can weld the joins as you go to ensure everything is welded before covering the joins with another tube. you now have the cage positioned with its X, now you should have LH & RH , left, these are 38mm and are the harness bars, simply tack the LH and RH ones at the outside join only measuring from the foot up to ensure the height is equal from left to right, then apply a level across the back of the cage so you can eye up your straight line in the middle, you may need to fettle a little bit until you’ve got equal heights all the way across from left to right. Abbreviations:- MRB – Main Roll Bar LB/RB – Left/right backstay D1, D2, D3 – Diagonal 1 2 and 3 (D1 allways goes top over driver head) LH RH – Left / right HARNESS BAR

GBP 522.59
1

MK2 5 DOOR SEAT LEON HALF CAGE (Material: Standard CDS)

MK2 5 DOOR SEAT LEON HALF CAGE (Material: Standard CDS)

This is a track day cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. This cage follows The Motorsport UK Blue Book Specifications. These are available powder coated in a range of colours! The cage comes with all required bolts and mounts to be welded in place. X BRACE NOT INCLUDED!

GBP 595.36
1

BMW E30 BOLT IN HALF CAGE (Colour: Unpainted, Material: Standard CDS)

BMW E30 BOLT IN HALF CAGE (Colour: Unpainted, Material: Standard CDS)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one.   These are available powder coated in a range of colours!   Full fitting kit included – mounts are to be welded into place.

GBP 529.20
1

Peugeot 206 Bolt in Half Cage (Colour: Unpainted, Material: Standard CDS)

Peugeot 206 Bolt in Half Cage (Colour: Unpainted, Material: Standard CDS)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one.   These are available powder coated in a range of colours!   Full fitting kit included – mounts are to be welded into place.

GBP 529.20
1